Yes, acetone will remove the paint off the outside of the tank post hast, but so will gasoline.... And somehow we all manage to keep that off the...
BMW Museum in Munich....:D. If you ever find yourself in Deutschland, It is AMAZING. Loads of cool bikes and cars.
Its not just them, everyone is out of stock of LOTS of stuff. Supply chain shortages.
This is what I refer to as the "brown lamp cord coalition" a group of people who believe that functionality is tantamount safety. If it works when...
I'm not sure it "includes" the mule team grader but you certainly get a little piece of the grader with that steering...;)
What have you done to the tank all ready? I had to rinse mine with very hot hot water several times (after acetone & vinegar) and de-scale it with...
I don't always listen to AC/DC in my shop, but when I do so do my neighbors...:devil:
Is the radius of a 16T to tight for an O-ring chain?
You may find that your clutch actuator is mangled, that can cause the problems you are experiencing. Ask me how I know…:whistle:
You might want to run a 16T front with that 30T to recover a tad bit of acceleration.
I like crimp on clamps.
What front sprocket are you running?
Bare aluminum if I can get all the black paint that’s on the head now off. If I can’t get the black paint off they will be painted “aluminum”.
I used universal aluminum and GM satin black.
No clear coat needed.
It’s quite durable if you do adequate surface prep & cure it once it’s dry....
I just used VHT aerosol paint. I only used my spray gun to spray some lacquer thinner on the case.
Cam chain riveted back together.
Cylinder painted & bottom end closed up. Letting the Moto-Seal set up now. [ATTACH] [ATTACH] [ATTACH]
You could do what I did and just move them both to the other side…
If it’s “locking up” when you disengage I would be VERY hesitant to start it. You could cause some serious/expensive damage. If it were mine I...
Separate names with a comma.