Search results

  1. J

    Building out a work shop

    Do I get this right ? The people doing the welding did not do it according to the drawing and Knew there would be an inspection.? How did the conversation go between the inspector and the welder. ?
  2. J

    XS650 Craigslist postings depository

    If it is far out and that Applies the whole thing must be taken half the wheel in cement .A large compressor and ?? 1 hour ..2 hours work . If it is deep who knows .Perhaps not possible at all 51000 miles Water into the pipes over the years Skilled dynamite operator ? ... Hahaha --- So...
  3. J

    I would like your opinions on engine storage.

    I think I would leave it apart .. Well lubricated and in marked boxes / bags Dry warm storage. To much work to assemble + gaskets and seals and so Even if not tightened something can go wrong. Is is simpler to move around if not the whole is to be moved at the same time
  4. J

    HYUNDAI ECM

    You are welcome ..Again I dont know anything about Cars Just to stick to the CSF Rule the 102 codes can be power supply Is the battery Old / Checked ? OK Progress .Servicing there --Connectors and measure . Then do a fresh error code outprint Please put it here we can see what the...
  5. J

    First start after rebuild

    I think the machine runs rather quiet .I would wait for a while --see how it develops wait for further developments
  6. J

    First start after rebuild

    Any chance it being parts of the old one ?
  7. J

    HYUNDAI ECM

    There are videos what connectors can be checked
  8. J

    HYUNDAI ECM

    Is it those codes P0102 MASS AIR SENSOR P00170 FUEL TRIM P0016 CRANK SENSOR CORRELATION https://www.youcanic.com/hyundai-fault-code-dtc/ No 102 codes besides low battery fex C1102 Battery Voltage Low P0170 Fuel Trim Bank 1 P0016 Crankshaft Position–Camshaft Position Correlation Bank 1...
  9. J

    Bmw screw heads

    I would assume Metric .They had an own standard DIN back in the day. Never heard of German Machinery not having Metric ..system. And they have been unwilling to change .Not least because of Some problems early 40 ies. I Know of people being there trying to sell Excavator accessories with...
  10. J

    HYUNDAI ECM

    Dont know anything about cars But putting it out here Reset error codes ( perhaps write them up ) Start running and when problems come shut down and read out the error Code
  11. J

    Horn

    I have also used car horns One from a Mercedes from a salvage and others I dont know for what car Bought from flea markets and so A car after market supplier would have here $ 10 Basic type...
  12. J

    What have you done to your XS today?

    Thank You Sir On the pictures it looks as Show Class paint . Is there really a need for the final sanding and polish Furthermore what brand paint is used. I have a small compressor so I am planning to try paint more.
  13. J

    What have you done to your XS today?

    Nice --Everyone's Choice ..but don't really see the need to raise the tank in front
  14. J

    The Big Sue resto-mod thread

    Maybe you are right there Googled how they look and they seems greyish black on the surface As i Remember it can look so if Oil hardened . If ground after hardening maybe more shiny metal
  15. J

    The Big Sue resto-mod thread

    Well grinding in a shop can have water cooling and fine stones Getting both sides parallel Perhaps polished also to get smooth. Surface not wear on the the other part. A coarse stone can induce scratches in the surface that is detrimental for fatigue life fex in Welded Constructions Without...
  16. J

    The Big Sue resto-mod thread

    I talked to the shop about shims for a Honda and the shop had a leave the old shim with some cash get the replacement Policy I did not change it since it was a big job and had tight OK clearances I believed they got tighter with wear but don't know Is not 54 000 Km on the high (...
  17. J

    Interesting motorcycles, not XS650

    The story I heard was that it was not dimensioned properly .. Here people parked the bikes 6 months for winter no trickle chargers existed then So come spring the owner tried to start it with a low battery .. As done with cars and other equipment a 4 cylinder could start but with a low...
  18. J

    What have you done to your XS today?

    Looks fine please tell more Preparation / What color / What spray gun / How many layers / Clear Coat / how large compressor. ? Done it before ? A Pro ?
  19. J

    Mystery Solved...

    Might be different in the USA And depending on where but here a shooting of predators can mean big problems. Jail time and harassment from animal protection groups. Honest people trying to protect their livestock One person shot a Wolf attacking his sheep The law came down hard on him. At...
  20. J

    Interesting motorcycles, not XS650

    Always liked the styling and personally I can se that one getting higher priced over time. I was at a barbecue party once when one person there had one . Fairly new and out of my price range. On a side note Suzuki sold well here The early intruders was liked and they sold many 750 ES If i...
Top