Search results

  1. L

    1981 Chopper Build

    This makes my pants tighten...
  2. L

    Sold / Found / Inactive - Engine Side Covers

    These still available?
  3. L

    3.5 inch handlebars.

    Stefan at Zombie Performance can make you some bars with the correct spacing.
  4. L

    XS Choppers are dead…

    Last weekend I was able to knock out the seat pan. Welding the uber thin fender to the .125” thick base kicked my butt….luckily it’ll be covered by foam and leather lol. The front channel was bent on my break and the rest of the seat was cut by hand and shaped on my 2x72 grinder. I’m hoping this...
  5. L

    XS Choppers are dead…

    Due to time constraints the motor will remain mostly stock but will be upgraded to a Hugh’s PMA, electronic ignition and a single VM36 carb. My good friend Dustin from Becks Built Fab whipped up one of his beautiful intakes for me to run.
  6. L

    XS Choppers are dead…

    The front of the bike features ultra narrow trees from TwinCity in Italy the front forks pictured are just a place holder until my 39mm HD forks come in. LED Sled is a sponsor for the Smoke Out Rally and they sent me this beautiful 21” invader to use for my build. I wrapped that in a Shinko 270...
  7. L

    XS Choppers are dead…

    Moving on to the rear of the bike. I found this CCi solid aluminum 16” wheel to run and that will be fitted with an XS to HD sprocket that I had Rebel Gears make. Then I mounted a Sting-Rey fender from Low Brow. Sticking with the square tube theme I bent up this square stock sissy bar and spun...
  8. L

    XS Choppers are dead…

    I’ll be using one of my XS handshifters that I created and sell on my web site along with a new foot clutch design that I’ve been working. The foot clutch lever is still a work in progress and the foot clutch hub pictured here is 3D printed. The final hub will be machined out of aluminum.
  9. L

    XS Choppers are dead…

    Next on the list were my motor mounts, mid controls and kickstand. All of these parts were designed in CAD and cut on my plasma table. I’ll be running a Tokico disc brake in the rear as well as a foot clutch and hand shifter.
  10. L

    XS Choppers are dead…

    Now that I had the frame jig knocked out it was time to move on to the frame. I started by machining an HD style neck. Then I drew up a 1:1 scale motor profile to build around aka no more lugging that heavy XS motor on and off of my jig. I wanted to do something different with this frame and...
  11. L

    XS Choppers are dead…

    Since I was now going to be showing this bike off to people other than my neighbors I figured I might as well really build this thing. I decided to nix the Voodoo hardtail and build the whole frame. I started that project by building my dream frame jig. I owned the Chop Source jig for years and...
  12. L

    XS Choppers are dead…

    I mounted the fender, made a sissy bar and seat pan for it as well as whipped up an electronics box to mount under the seat. Then it sat like this for a bit. Shortly after getting to this point I was selected to be a builder for the 2024 Smoke Out Rally. The other builders were all building...
  13. L

    XS Choppers are dead…

    So next, I stripped the bike down to its frame and welded on Mikey’s lopped hardtail that he had made for me.
  14. L

    XS Choppers are dead…

    I haven’t built an XS650 in years. I’ve been building parts for them for a decade and a half and they’ve always had a place in my heart but over the past five to six years I’ve been focusing on Harley’s. Six months ago I had a friend reach out and ask if I wanted this XS650 that’s been sitting...
  15. L

    Mid control options

    Whoa! Blast from the past….I haven’t been on here in ages! Yes, I still make them. They’ve gone through a few changes and improvements over the years. They can been found at www.xsmids.com.
  16. L

    jockey shift?

    I make and sell a foot clutch set up or I can walk you through modding and making your own. It’s not difficult to do. Shoot me an email via my website: www.jumpstreetcustom.com
  17. L

    Wanted - Wanting to buy PAMCO

    Looking for a PAMCO ingnition. Thought I’d try here before giving Pete some money.
  18. L

    For Sale - Pamcopete

    Is this still available? I’ll take it if so.
  19. L

    Wanted - Looking for a XS650 16" spoke rear

    I'm interested! Shoot me a text. 5175802581 Thanks!
  20. L

    Wanted - Looking for a XS650 16" spoke rear

    Shoot me a text if ya could 5175802581
Back
Top