Search results

  1. Sn34ky

    Pamco voltage? weak spark?

    hey... got a problem!! Testing voltage on my pamco cause my sparks seems to be really weak IMO and can't get my carbs jetted right. I read a steady 12.5v on the red wire ignition on and at idle, but a juggling 6.5 to 8.5v on the green at idle and when only on battery juice, I read 0.915 - 1.0v...
  2. Sn34ky

    Stiffer shocks

    Hey! I need advices on stiffer shocks. My 30 years old one are too soft for my setup even if the sag is ok, but the angle I got make them a little bit too soft on bump and curves. I don't want piggyback and spend 300$ on a progressive setup. Need to keep it in the 12'' to 13'' length. Any...
  3. Sn34ky

    Gloss Clear over Matte Clear

    If I gently water sand with a 2000 paper a Matte Clear finish and then spray a gloss clear, is the matte will remain under a shiny transparent coat or it's just gonna turn glossy black? Tanks!
  4. Sn34ky

    Mounting the rear caliper under...need opinions!

    Here's my ''problem'' : I want to mount my stock rear caliper under the swingarm, for achieving this I need to find a good spot on it to bolt a brake stay. Which one of a pulled or pushed caliper have the greatest energy transfered to the brake stay? Here's the 2 options, just tell me if...
  5. Sn34ky

    Exhaust tubing material question?

    Question here... Did a 1.750 OD DOM 1020 tubing with .095 of wall is too heavy for making a custom exhaust ??
  6. Sn34ky

    The BoB-A-SwinG build 1st XS attemp!

    The BoB-A-SwinG bratstyle build 1st XS endeavour! Hey guys! Snow is finally melting up here and temp get a little bit warmer so I can start working on my xs. I'm going for a brat/bobber since hardtail are illegal here. I was collecting parts all winter long, so it will probably goes pretty fast...
  7. Sn34ky

    Converting '78 BS38 Carbs from straight boots to angled

    Hey, i'm looking to convert my '78 bs38 straight to the angled holders... is it possible? Correct me if i'm wrong... I need the throttle bracket and the throttle lever assembly? Did those parts will fit on the right or left side of the carb (right one when sitted on the bike)? If I can fit...
  8. Sn34ky

    Crazy gaz tank!

    Just found that on a blog, just wanna share this beauty! If someone knows where I can get one of those! And you can show us what you guys have or want to share, painted or raw! Crazy is the word!! Uploaded with ImageShack.us Uploaded with ImageShack.us
  9. Sn34ky

    Start it and then nothing!

    Ok, i've tried jump on my bike after work tonight, I turn the key on, everything was fine, e-start it... run a little bit, died... it's cold outside, so everything's normal... tried to start it 2nd time, startor turn a little, then EVERYTHING died..., no lights, no juice at all... no everything...
  10. Sn34ky

    Led Taillight almost shut-off when turn signal's on?

    Hey guys! I just put an Led Taillight/brake light and when I put turn signals on, the taillight almost shut-off with the cycle of the flasher? When the brake light is on, the light is less affected... what can it be? 2nd question: I have a set of led mini turn signals, I've read that I'll...
  11. Sn34ky

    Right cylinder sucking air

    Got a probleme... just found that my right cylinder is sucking air... Hard to find something on that here... What can it be... Cam? Timing? Leak? Why the right is sucking and the left one farting really nice?? I don't have too much experience in twins, but I know that air sucking...
  12. Sn34ky

    Foot control the front brake

    Hey guys! I have a '79 with disc on both wheels... I wonder if the rear master cylinder can handle a front and rear brake setup on the foot?? I'll probably need a proportioning valve?? what else? thank you all!! Any tips will be appriciated!
Back
Top