Search results

I did a 706 cc kit last year but i cant het mt oil tube to seal

Hey ive got a 79 xs650 with air pods n carbs jetted for them and exaust i jusg put 706cc kit in my bike uve got a daddy g rich chopper style kick only harness but i was wonderinbif it was safe to continuevto use nylon screw mod with brand new boyer system i cant afford another one at that price

I have a 79 XS650 with nylon screw and modern regulator rectifier mod with a 706 CC kit from cruising image still has the points in it with a stock setup with points stock 34 mil vacuum carbs just jetted for the bigger cc and air pod filters I'm to the point of I'm about to shoot this bike plum...

So I have a 79 XS650 I just got done putting a 706 cruising image kit in it stock carburetors jetted for airpods with aftermarket shorties baby glass pack mufflers nothing but nothing real fancy with an aftermarket key switch I've got no kill switch whatsoever I am running a PC Brothers harness...

I just need to know this slot for a keyway on my cam it's a 79 XS650 with a board out 706 kit from cruising image Stop Cam and everything else other than the bore and I'm still going to use my point setup and then I had to pull the pin for the auto for the advance weights out of another cam cuz...

Im bout to finish off my big bore on 79 xs650 and was tryin to figure out how long round abouts ..... To finish mech. Advance. Points and time itall adjust valves n all plus put it in and re jet carbs plus put pegs exaust in everything together lik ride ready tybin advance im trying to...

So i was finishing cleaning up my top end pieces to my 79 xs650 im doing a 706cc kit from cruzin image and went to grab my parts outta the parts washer and seen this damage to my rockers

So im putting together my brand new 706cc kit for my 79 xs650 ive done sum dighing and cant find a satisfactory answer now small engines r sum wat new to me i think retired gentlemen said he uses permatex aviation gasket seal but it never really sets hard i also have permatex indian head...

I need a master cylinder for my stock 79 xs650

I have a brand new never been used still in box front/rear tire . Its a shinko sr735 and the size is 110/90-16 . $60 bucks o.b.o. shipping on u or free local pick up .

So i seen a picture of a 79 xs650 cafe' witch is also wat i have . Im currently in proxess of building my self a 706cc motor for my bike and stumbled across the pattern to drill my mags any thoughts on the subject . Also im looking for a set of dog bone risers for 7/8s bars. And i bout a...

Sum ass hole knocked my bike over at work and of course it was just off camera. So now im in search or a set of clubmans or clipons or posably a set of hhb speedster bars something along thoes lines for my cafe if any bodys got a set for sale please let me no . Thanks david

Hey guys i went to chang3 the oul in my stock 79 xs650 and the oil had a little gisin to it so i looked deeper and found this any thought or advice thanks.

Im looking for a set of spoked wheels for a 79 xs650 ive got a set of mag wheels if any one would wanna trade the mags aint bent pitted or nicked or anything there good wheels

I no its bad tk say but with this all going on every where i finally got time off to do my stroke and 706 kit . Started the prep work on it all today now all thats left is everything.

My crusein image 706 kit finally came from the land of the rising sun I'm so excited can't waite to get my jug sent to machine shop

Hey ive ive 79 xs650 with a slightly altered stock wire harness i rode to work then wen i went to leave my bike wouldnt start no tail light and no starter nothing but wen i turn the key through its rotation half way through my tail light would cum on then go bak out i replaced the ignition...

Couple days ago my 79 xs650 with aftermarket dual exhaust and pod filters started running a little off at highway speed everything else is ok . I thought my carbs just needed to be resynced . So i hooked up a vacume gage to my carbs and according to 2 it at lik 3 n 4 grand ish eg 70mph. cuz i...

I'm running 34mm mikunis with k&n pods n I'm about to put lowbrow customs mufflers on in the next few days n I could use help with jetting big jet is74.0 and small is 42.5 I no I need a bigger jet for start and idle but not sure on the rest carb jetting is kinda new to me on bike carbs n I'm...

So I was trolling the net n run across this n I would luv to hear wat y'all think on this and how it's done cuz I'm n luv and it's cool a hell