Search results

thanks for the clarification JP.

i see it says new ignition? starts at 11 Deg.? and then advance at about 1500 to 1600 RPM

Hi Fenb. finally some one on ere taking on the challenge of Ignitech, i have been reading endlessly trying to understand / apply to my project, but a couple of questions for you, first do you have a program loaded on a laptop to check the set up of the advance mapping ? are you running a...

I'm sure there has been a thread on this, but so far have not read any that have asserted info on jetting specs with 2.5 slide , does or does not work properly with a 2.5 cut slide, this is what i have in these new carbs. I would like to jet it for a standard 650 street set up. thanks in...

https://www.rush.com/wp-content/themes/rush/assets/img/transparent-square.png

For those who are paying attention to our protest up here, you may of heard of the accusations of , extremism. radicals. Islamophobics etc. you can now add space aliens

hi hotdog, can you tell me if 2MM OS will work, from your experience?

http://www.sbintl.com/tech_library/articles/understanding_valve_design_and_alloys.pdf Tripped across this if anybody is interested

so does anybody make a titanium valve ?

1MM only,

so even with the 1MM oversize you are having clearance issues?

Hoos has 1 MM , just trying to figure out weather this is realistic or not, even trying to find XV750 valves is tough, not much chatter on here as to being done so far.

maybe this is a dumb question but would a different style electrode clear that or has been tried?

so the larger valves require the port to be widened under the seat if i understand correctly?

so are 2MM valves available off the shelf ? or the XV only and grind the seats to fit putting it in simple terms?

how about - 23 degrees Celsius in eastern Ontario this morning

my understanding is you use only one pick up which they can supply but they are recommending a crank triger vs cam, the ECM has to be calibrated for the firing order, im looking at a flywheel option or maybe a stock stator for the triger

Thanks again Sig for your input, i was pretty sure that the " left side is stock or bench mark for settings" would seem logical, but i want to be 100 percent asserted when i have the conversation with the rebuilder, and to confirm the right side is 3 splines forward?