bobber

  1. J

    For Sale - 1975 Yamaha XS650 project

    This is a 1975 Yamaha XS650 that I started a bobber project with. Below is a list of all the parts that come with the bike and the frame jig as well as pictures of most everything. There are also a few parts I fabricated for it that aren't listed. The bike ran before I started the project and...
  2. kubber93

    jap style bobber

    Yo xs freaks. im new in here and my custom bikes knowledge level is only little bit above 0... Im going to buy a base xs650. After months of searching for a perfect look i've decided to make it look a little bit like this one. It would be awesome if anyone can help me with the hardtail...
  3. LOWBOY925

    For Sale - 1980 xs650 re-listing

    Hey guys, my buddy posted this bike for me previously. I am dropping the price significantly due to the fact I need the cash for my other project asap. Only asking 900$ firm.
  4. Ash

    XS650 Bobber Rims/Tyres help

    Hiya, I've recently bought as XS2 and am looking to get some new tyres/rims. At the moment they're standard at 18" x 4.00 rear and 19" x 3.50 front. I'm using this bike as a donor so i can turn it into a bobber. Can anyone give me some advice on what size to go for. I've been told 16" rear 19"...
  5. M

    For Sale - Chop Source Frame Jig Kit XS650(craigslist ad)

    For Sale in the Eastern Pandhandle of West Virginia. Please read the ad before responding. Thank you. http://martinsburg.craigslist.org/mpo/5916793072.html
  6. C

    For Sale - OLD SCHOOL SPEED MIDSET & CABLES

    NEW IN BOX, OLD SCHOOL SPEED MIDSET CONTROLS $120+SHIPPING, MIKES XS CLUTCH CABLE 74-84. $10+SHIPPING, THROTTLE CABLE $15+SHIPPING. WHOLE LOT $150 SHIPPED
  7. tyzharley

    For Sale - 1980 Custom Bobber XS650 + Frame Jig

    I am selling my 1980 XS650 Custom Bobber. It has two seat option. I am also including the Frame Jig that I also built. My number is 719 433-0235. I am asking $3000 for both. Need to sell due to family health issue. Runs and drives Great!
  8. C

    Trail tech or normal gauges...

    I really have my mind set on the trail tech vapor gauge. But seems like ppl are having trouble with them with the pamco setup.. Before I order one anyone have anything bad to say. Really not a fan of the stock gauges on a bobber look....
  9. X

    For Sale - 1976 parts engine frame title ect

    Local pickup located in south Jersey Running 76 engine Frame with title gussets were removed Forks Triple trees Rear wheel Swing arm Wire harness Carbs Started building a bobber here's what's missing sold these parts that weren't needed tank front wheel side covers speedo seat fender still...
  10. X

    Where could I get my forks shaved?

    Looking to shave the mounts on my lowers I don't have a lathe to do so, wondering if I took them to a local machine shop they could do it? If it would be expensive Or if anyone on here does it on the side. Building a chop and I need all the mounts shaved.
  11. C

    Xs650 carb

    I have an 79xs650 bobber ive been building. I have pods and low backpressure exhaust. I had my left cylinder burning super hot, so i swapped the stock jets for 140 mains, now its still running super hot, but its black sooting now, so tomorrow ill raise the pilot jets up a bit. And lower the main...
  12. X

    xs650 wheel question?

    I have I 76, i guess they call it the shouldered rim? Basically water will sit in it when wet. I think it's aluminium I'm looking to buy or trade for a later style rim will it still lace up the same if it's 36h? Thanks (And also if any one has one laying around I would trade or buy just the rim).
  13. Infantilebehavior

    For Sale - Ribbed bobber fender/strut

    As title reads. It's a ribbed bobbed fender with fender strut. Originally came off older triumph. Fits 18" wheel. Mount is gonna need slight work as one mount ring is coming apart. Two mounting holes in bottom crooked? Gonna need a little work or just bolt her on n go. Depends on u. I'm to much...
  14. tyzharley

    For Sale - 1982 XS650 Custom Two-Seater

    This motorbike is set up and ready to ride. Built on a frame jig to ensure bike frame is true. I will sell the bike for $2500 OBO. I can deliver for a fee. The build took about a year to finish. I put about 700 miles on at the 75th Sturgis rally. It has a mix of Harley and Yamaha parts...
  15. X

    Make Offer - 76 engine frame and parts with title

    Only will sell parts if engine and frame is sold first not looking to sell cheap just testing waters I will keep and build if I don't get what I would want. 1976 xs650 standard frame neck gussets were removed needs finishing in that area everything else untouched have title Running engine...
  16. abyssmaltailgate

    For Sale - XS650 Hardtail Frame

    FOR SALE: '78 or '79 Yamaha XS650 XS-F custom, hard tail frame. Has forward controls, kickstand, battery box, fender struts, wiring under seat and through frame. NO TITLE. MIG welded in jig, tracks straight, ran for years. Can be run as is or clean it up and show it some love! $500 shipped in...
  17. jolo9534

    next step after hardtail

    hi guys, new to building bikes. i was wondering whats people opinion on what step i should take after getting the hardtail welded on. its a 78, i was thinking of setting up the handel bars and seat, then start on the brakes. after that ill have figured out if i should up grade to a big bore kit...
  18. klkoehler83

    My first xs build, an attempt at a bobber chopper thing

    Here is the the link to all of the build pics. This bike is so much fun! I really abused this forum during this build, so much good information.:thumbsup...
  19. K

    Side stand switch??

    Bear with me, I'm absolutely new to the XS world. I was barely used to the dirt bikes I had. I picked up '77 already on a weld on frame with a PMA kit installed. It would barely start and after some carb tweaking, I have it starting solid. I didn't get to talk to the PO much about it but...
  20. girard

    bobbed wiring route

    hey Guys, I am in the process of wiring my bike but am having a hell of a time finding a route to run my wires from the bars back to my e-box. i am trying to do all my connections in the e-box so am running most stuff back to it. all in all ive got about a 5/8-3/4 loom size of wire running...
Back
Top