Mine's a walk out basement. No (major) problems getting bikes in and out.
Last edited:
-
Enjoy XS650.com? Consider making a donation to help support the site.
XS650.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
'74 RD350. Yeah... I know....
- Thread starter Jim
- Start date
For future reference:
Found these cylinders on Ali Express .https://www.aliexpress.com/item/100...8XnEo2jf&utparam-url=scene:search|query_from:
Most of the cylinders are Indian spec but these ones I believe are US Spec. The info on this is from a UK website. The same site also said the manufacturers have addressed the liner casting so they wont drop like the indian spec liners do.
The tell in the two castings is the US spec ones have the round supports under the top 4 fins , the indian spec ones do not. 5th photo down.
I think the pistons would make suitable ornaments or paper weights.
If I ever get a set of barrels I will get them X rayed to see if the liners have a top or bottom flange.
Found these cylinders on Ali Express .https://www.aliexpress.com/item/100...8XnEo2jf&utparam-url=scene:search|query_from:
Most of the cylinders are Indian spec but these ones I believe are US Spec. The info on this is from a UK website. The same site also said the manufacturers have addressed the liner casting so they wont drop like the indian spec liners do.
The tell in the two castings is the US spec ones have the round supports under the top 4 fins , the indian spec ones do not. 5th photo down.
I think the pistons would make suitable ornaments or paper weights.
If I ever get a set of barrels I will get them X rayed to see if the liners have a top or bottom flange.
