Aftermarket throttle, and cable?

[Sowiuk1]

So I purchased a domino single pull throttle for my XS and for obvious reasons the XS 650 standard throttle cable does not fit with the metal bend. Any suggestions for aftermarket cables that would fit a low bar XS or is there an option to build your own?

 

[Jim]

Google Motion Pro. Probably the best cables out there

 

[grizld1]

Lots of options to build your own at www.flandersco.com

 

[arcticXS]

Or Venhill in the UK. They sell stock reproduction cables for many bikes, materials for making your own, or one-off cables to customers spec.
They also offer the same services for brake and clutch hoses.

https://www.venhill.co.uk/cables-and-components.html

 

[Kevin Werner]

Awesome knowledge base here...

 

[Sowiuk1]

Awesome knowledge base here...

Tell me about it. I dont know what I would do without these guys.

 

[JRay77]

One more on the Venhill. I keep a kit around for repairs.

 

[Sowiuk1]

Or Venhill in the UK. They sell stock reproduction cables for many bikes, materials for making your own, or one-off cables to customers spec.
They also offer the same services for brake and clutch hoses.

https://www.venhill.co.uk/cables-and-components.html

Thanks for this recommendation, being in the UK, i have ordered the throttle cable kit from here. Will see how it goes.