Wanted - Disc mag wheels no tires

G_YamTech_314

XS650 Junkie
Top Contributor
Messages
854
Reaction score
1,794
Points
143
Location
Lancaster Pennsylvania
Looking to score a set of decent condition mag wheels with a rear disc (not the rare and expensive drum mag rear)

I'd highly prefer no tires included, as I'll need to buy new anyways, and it makes shipping cost a ton.

Who's got 'em? Much appreciated
 
Looking to score a set of decent condition mag wheels with a rear disc (not the rare and expensive drum mag rear)

I'd highly prefer no tires included, as I'll need to buy new anyways, and it makes shipping cost a ton.

Who's got 'em? Much appreciated
From the same bike I took your swingarm off of. I'll get you some pics in the morning.
 
I also have a set if Jim’s don’t pan out for you. I replaced the wheel bearings and repainted them but never ran em. Also have a set of drilled rotors that I could make as a package deal if interested.
 
I also have a set if Jim’s don’t pan out for you. I replaced the wheel bearings and repainted them but never ran em. Also have a set of drilled rotors that I could make as a package deal if interested.
I'm open to multiple options.

What's the price for the whole deal?

What color are they painted???
 
Painted black except the outter ring is still natural. I’d have to remove the tires but that’s not a big deal. I’ll get some pictures for you tomorrow.
 
Here’s a picture of them mocked up. They’ve been in storage a few years since I switched to 19’s front and rear. Also have a couple 19’ that were drilled out if that interests you too.
11C8317D-1029-471C-B1B5-CE4CB18B7A3F.jpeg
 
Well shoot. Gettin' old and forgetful. Can't find 'em... musta already sold 'em. :umm:
Your turn Willis.
 
Last edited:
Here is what I have. 19 inch without rotor $35, 16 inch with rotor and sprocket $75, 16 inch without rotor and sprocket $35. All plus’s shipping. Can remove tires. All will need painted. 94E40912-0174-4F6A-ABA6-6908A6315FE5.jpeg764B031C-3639-4DB0-95C3-73BB26BC6D2B.jpegF90F0BDF-9A8B-4808-8FA6-2AC07BC830DC.jpegCB9058F7-2061-449A-8BAB-906B66F59220.jpegD13185F2-5760-471B-8C78-418E8594CCF0.jpeg384C81B9-A3A3-4586-BB8C-AB33A4F4FAA2.jpeg2262680E-8C2A-49D8-8DB8-F9BFBD246864.jpeg7B35A811-934A-4F76-91D8-A1392D8761C0.jpeg1864469B-1F2B-4658-BD6C-9D4D0AC7DBDF.jpeg
 
Hey Jim. Didn`t I trade you some DT250 stuff for those??:umm: I think their the ones I painted red for my No Theme build
 
They say that memory is the first thing to go.:doh: I can`t for the life of me remember what the second thing was?:shrug:
 
In regards to my second guessing all of this before settling in a purchase, what are the biggest differences between a 19 and 16" rim for the rear aside from chain rub and top speed?

Smaller tires make top speed lower correct?

Would a cafe racer look at all decent with the 16"? I know this is all stuff I need to make my own opinion on, but it helps me to hear from other perspectives about something so important. I want the bike to handle well, and also be reasonably fast, and of course I want it to look super good too. What are some thoughts on this all?
 
7A83E127-02C3-4FDB-89DA-116623FE99DC.jpeg 7E11D1A0-CF1B-4291-A9DC-4EDD8F159E73.jpeg
19” on left vs 16” on right.

16” can run a wider tire, up to a 130. If you go with dual 19’s you will need to buy the Omar’s adapter kit. Runs in the neighborhood of $300. Taller shocks should also be considered. Not sure that speed is a factor between the two sizes but the 19” rear would be a bit nimbler than the 16.
 
Wait, so both of those pics featured a 16" rear? You say left right, but the pics are on top of one another. Just wanting to be sure I know what I'm looking at lol!

EDIT****** I view the forum on a smartphone... When I turn it sideways your photo orientation is correct. My apologies
 
Last edited:
Back
Top