Max bore with stock head and base gasket ?

[Melon]

I plan to buy the 1.5mm oversized pistons from cruizinimage and have the cylinders bored to match. Havent been able to find any info on whether this requires an oversized head and base gasket, or if stock sized will work? If oversized required, anyone have any links to good sources?

 

[arcticXS]

Stock base gasket will definitely work, as you are boring out the stock liners. Headgasket may also work, depending on how many OEM oversizes were available.

 

[grizld1]

I've used Vesrah OE spec stock head and base gaskets with 77.5 mm. pistons. You won't have a problem with any aftermarket head gasket made for the stock bore at 76.5 mm. piston diameter.