MID CONTROL BRACKET

[phil240]

I recently acquired a CNC for my plasma cutter

I am just gauging interest to see if anyone would want mid control brackets made.

 

[willis]

Just to clarify, are you referring to a mid mount bracket for a hardtail application, or a mid control for a rear-set cafe type?

 

[phil240]

Just to clarify, are you referring to a mid mount bracket for a hardtail application, or a mid control for a rear-set cafe type?

The mid bracket that goes off the mounting block on the frame. Similar to the monstercraftsman one.

 

[phil240]

Update
The cut file I designed is good
Have 3/8 steel on the way to cut some

These will be available for sale soon

 

[arcticXS]

You still did not confirm if these brackets move the pegs more forward (WHY anyone want that is beyond me, as the stock pegs are already too far forward)
Or do they move them more aft (which is a good thing, up to a certain point)

 

[phil240]

You still did not confirm if these brackets move the pegs more forward (WHY anyone want that is beyond me, as the stock pegs are already too far forward)
Or do they move them more aft (which is a good thing, up to a certain point)

Like I stated above these are similar to the monstercraftsman ones that seem to not be available anymore. I know a few people have mentioned on here they have been trying monstercraftsman for parts and received no response or parts.
I do have a cnc but I do not have a press in my shop yet. So these would be a straight cut 3/8 plate set up with the holes in the same spot as their mid control mount. If you have a press or wanted to use a hammer and vice you could make the desired bends.
Hope that clarifies it for you artic. If not once the 3/8 ones are cut I'll post pics for all to see

 

[Flash1977]

I recently acquired a CNC for my plasma cutter

I am just gauging interest to see if anyone would want mid control brackets made.

Did you ever make brackets? I ask because I recently bought a set of used mid controls without the brackets. I am considering making something work but if you have a set, let me know. Thanks