Jim,
the 4 x head bolts on the periphery of the engine are they the copper thicker washers (as used on Suzuki) or are they available to buy now, specifically for the XS
Last edited:
Jim,
Thank you 5, they actually look pretty trickJust make sure they're thick enough so the acorn nuts don't bottom out on the studs before the head is tight. I used the Suzuki washers on my 1st XS but now just use 2mm thick washers I got off eBay .....
https://www.ebay.com/itm/153431432762?ssPageName=STRK:MEBIDX:IT&var=453372990672&_trksid=p2060353.m1438.l2649
View attachment 212159
Correct... at least Partzilla's parts catalogue says that.750 fronts same as 650 rear.
1/2 the discs are not here yet neither the callipers, Hopefully they will match my 365mm front presently on the TangoI might be wrong about this but I was thinking that the 750 discs were smaller in diameter than the 650 ones. 750 fronts same as 650 rear.
Superseal type seem to be popular I like simpleThat matt black headlamp, with the tango tank, looks proper that does.
Not too sure what you mean by your question about connectors. You have lots of options - Japanese-style bullets or perhaps multi-pin mini-connectors. Or is it a question about what wire connects to what?