Roll
XS650 Newby
The following parts are for sale and any reasonable price will be accepted. I want this stuff gone. Buyer will pay all shipping costs. My bike is a 1981 XS650SH and many of the parts were removed when I modified the bike. However, some of the parts came with the bike when I purchased it.
I didn't put too much detail in the photos, so if you see something you're interested in message me and I can provide more information and detail.
Wheels & Rotors:
The wheels are in pretty good shape. There are very few dings and should clean up nicely.
The rotors are still usable. I did not drill the one rotor.
Forks, Tree & Brace:
The brace was on the bike when I purchased it and it's in great shape.
The forks, caliper and reservoir came with my bike when I purchased it and all need to be overhauled. They have been polished.
The brake line is from Jinlong, 3.2mm, 40 5/8" ctr to ctr. It's in great shape.
Cafe Bars and Badges:
Cafe bars came with my bike. They've never been installed and are like new.
Badges, 2 new full sets, one old.
Gas Tank & Cap:
Both are in ok shape. The tank has a ding on one side.
Swing Arm, shocks, brace, rear hub & spokes:
The swing arm, brace, hub and spokes came off the bike when I installed an Omar's rear disc brake kit. They're in very good condition.
The shocks are in great shape.
Billet Carb. Flanges By Richard Getman: SOLD
Came with the bike, never installed.
Misc. Lights:
Headlight and bucket are in great shape.
Misc. tail lights are all usable.
Turn lights are kind of rough but good as replacement parts.
Petcocks:
Were on the bike and have been modified to non vacuume type.
Filters are dirty but usable if cleaned.
Clutch Discs:
Are brand new. Never installed.
Engine Oil Filters, Petcock Kit & Rear Brake Reservoir :
Came off of my bike when I switched to a spin-on type oil filter.
The petcock seals came with the bike and are for the vacuume type petcock.
Rear brake reservoir is usable but has a few cut marks in the attachment flange.
Tach, Throttle Cable, Mud Flap:
The tach with a red bezel doesn't work but the back plate is in perfect condition and can be used for rebuilding.
The tach with the black bezel works, but the back plate is faded.
Mud flap is a little faded, but still works.
The chrome bucked is a little pitted but usable.
I didn't put too much detail in the photos, so if you see something you're interested in message me and I can provide more information and detail.
Wheels & Rotors:
The wheels are in pretty good shape. There are very few dings and should clean up nicely.
The rotors are still usable. I did not drill the one rotor.
Forks, Tree & Brace:
The brace was on the bike when I purchased it and it's in great shape.
The forks, caliper and reservoir came with my bike when I purchased it and all need to be overhauled. They have been polished.
The brake line is from Jinlong, 3.2mm, 40 5/8" ctr to ctr. It's in great shape.
Cafe Bars and Badges:
Cafe bars came with my bike. They've never been installed and are like new.
Badges, 2 new full sets, one old.
Gas Tank & Cap:
Both are in ok shape. The tank has a ding on one side.
Swing Arm, shocks, brace, rear hub & spokes:
The swing arm, brace, hub and spokes came off the bike when I installed an Omar's rear disc brake kit. They're in very good condition.
The shocks are in great shape.
Billet Carb. Flanges By Richard Getman: SOLD
Came with the bike, never installed.
Misc. Lights:
Headlight and bucket are in great shape.
Misc. tail lights are all usable.
Turn lights are kind of rough but good as replacement parts.
Petcocks:
Were on the bike and have been modified to non vacuume type.
Filters are dirty but usable if cleaned.
Clutch Discs:
Are brand new. Never installed.
Engine Oil Filters, Petcock Kit & Rear Brake Reservoir :
Came off of my bike when I switched to a spin-on type oil filter.
The petcock seals came with the bike and are for the vacuume type petcock.
Rear brake reservoir is usable but has a few cut marks in the attachment flange.
Tach, Throttle Cable, Mud Flap:
The tach with a red bezel doesn't work but the back plate is in perfect condition and can be used for rebuilding.
The tach with the black bezel works, but the back plate is faded.
Mud flap is a little faded, but still works.
The chrome bucked is a little pitted but usable.
Attachments
-
IMG_1464.jpeg -
IMG_1465.jpeg -
IMG_1526.jpeg -
IMG_1527.jpeg -
IMG_1489.jpeg -
IMG_1492.jpeg -
IMG_1493.jpeg -
IMG_1494.jpeg -
IMG_1495.jpeg -
IMG_1496.jpeg -
IMG_1497.jpeg -
IMG_1498.jpeg -
IMG_1499.jpeg -
IMG_1500.jpeg -
IMG_1501.jpeg -
IMG_1502.jpeg -
IMG_1503.jpeg -
IMG_1504.jpeg -
IMG_1505.jpeg -
IMG_1506.jpeg -
IMG_1507.jpeg -
IMG_1508.jpeg -
IMG_1509.jpeg -
IMG_1510.jpeg -
IMG_1511.jpeg -
IMG_1512.jpeg -
IMG_1514.jpeg -
IMG_1515.jpeg -
IMG_1516.jpeg -
IMG_1517.jpeg -
IMG_1518.jpeg -
IMG_1519.jpeg -
IMG_1520.jpeg
Last edited:
