Permatex Copper Gasket Dressing

BarrieC

XS650 Addict
Messages
103
Reaction score
133
Points
43
Location
Downham Market
Guys,
ive read the excellent top end rebuild thread (a few times now) and from this and other posts its seems like a very good idea to use Permatex Copper Spray on the Head Gasket and to put a very small bead of not setting Gasket sealer around the outside edge of both sides of the base gasket.
Just a thought: why not treat the base Gasket to the Permatex Copper Gasket Dressing?
Wouldn't it work well on ensuring a good seal?
Thanks
Barrie
 
Thanks Guys,
I bit the bullet earlier as could not find another suitable dressing for Head Gaskets - but in the UK you cant get Permatex Copper Spray for much less than £30 Ouch!
So I wanted to get the max use, also, not keen on putting beads of gasket, where its possible it could squeeze out and get into the oil flow (except where i have too
Barrie
 
Yup! Spayed it on mine as well. 👍🏻
3E32088D-FF0E-4212-9A4D-9FF187582EA4.jpegEDD552A8-343D-4E00-A752-0BFB3D4A8CDF.jpeg
 
Back
Top