I probably would of been putting this 72 I got from Gary almost finished by now if had did not broken my hand. My hand still hurts some but wanted to see if I could get it too run before tear down. I removed the carbs and cleaned them and installed new kits. Cleaned the points, replaced the plugs, set the valves. Installed new battery. The bike started right up. Nice and quiet. I only let it run for a few seconds. It did idle ok. I rem that I did not check the oil. It was over full and was milky - had water in it. Now I am ready to tear it down.
When I drained the gas the last paint installed did not have 2X Clear. Gas ate up the paint. I have to sand it all anyway.
Thanks Gary.
Bill
When I drained the gas the last paint installed did not have 2X Clear. Gas ate up the paint. I have to sand it all anyway.
Thanks Gary.
Bill