jay760

Yes was supposed to be the 1/8th changed now to avoid confusion, Was figuring it should be in the 11's been a long time since I've...

Haven't done much to it lately, I've been having problems with the bike I'm riding at the moment, finally last weekend I'm hoping I've...

I've stiffened them right up with spacers in the top of the tubes, the only other thing to do would be to get a lowering kit for them...

Engine mounts have been welded, engine is in very tight fit but its in

Ù Thanks, The wheel base is around 72" it's a period frame so will work with what I've got, it's just too long to stay in classic...

Engine is starting to go together now, Shell rods with 80.5mm JE pistons, head will have 2mm over valves and Shell #3 cam, this is a lot...

Bottom engine mounts are finished and welded up, need to get the engine built then decide if I'm putting a top engine mount on and how...

I would build it lightly lubricated, I had one one the bench for a year when I opened it up because I wanted some parts the one half...