IronJim
XS650 Member
Hey guys
Having some issues with engine speeds after pamco install. The bike wont rev past 3500k as soon as it hits 3.5 the bike starts to cut out but wont stall. My initial feeling was the advance was kicking in to early. Iv done the timing on the bike and engine runs perfect at idol and all the way to 3.5k then it just cuts out, sometimes it will go past but most of the time it just cuts out.
Iv check battery and all charging and its all running well. Any advice would be greatly appreciated.
I have installed -
PMA charging system
Basic Pamco High Output Standard Ignition Kit, no electronic advance
New springs for the advance mechanism
Having some issues with engine speeds after pamco install. The bike wont rev past 3500k as soon as it hits 3.5 the bike starts to cut out but wont stall. My initial feeling was the advance was kicking in to early. Iv done the timing on the bike and engine runs perfect at idol and all the way to 3.5k then it just cuts out, sometimes it will go past but most of the time it just cuts out.
Iv check battery and all charging and its all running well. Any advice would be greatly appreciated.
I have installed -
PMA charging system
Basic Pamco High Output Standard Ignition Kit, no electronic advance
New springs for the advance mechanism