I have a set of chromed, single wall, 38 mm OD (1 1/2") pipes, purchased from Heiden tuning some 10 years ago (Most likely identical to pipes sold by MikesXS at that time, and some time after ).
They were never perfectly symmetrical, when viewed from forward, but I never bothered to post any complaint about it. The mufflers still ended up symmetrical at the tail end, which was more important IMHO.
When fitting my rearset pegs, the RH pipe is interfering slightly with the brake pedal, so it has become more of an issue now. See attached pics, showing that they differ in both horizontal and vertical position as viewed from the front. The RH is both lower and further out from the frame cradle.
So my question is if any other forum members have experienced similar issues with MikesXS/ Heiden Tuning 1 1/2" pipes?
They were never perfectly symmetrical, when viewed from forward, but I never bothered to post any complaint about it. The mufflers still ended up symmetrical at the tail end, which was more important IMHO.
When fitting my rearset pegs, the RH pipe is interfering slightly with the brake pedal, so it has become more of an issue now. See attached pics, showing that they differ in both horizontal and vertical position as viewed from the front. The RH is both lower and further out from the frame cradle.
So my question is if any other forum members have experienced similar issues with MikesXS/ Heiden Tuning 1 1/2" pipes?