A shot of the Vapor and the modified stock Yammie instrument mount I used which I installed on the stock rubber isolation grommets. I just used the TI
Applying the self etching primer to the frame and misc. parts.
The yellow stuff all painted. The wife really didn't like having this stuff in the living room for some reason!!
The Trail Tech VAPOR shown from the top.
A shot of the Vapor and the modified stock Yammie instrument mount I used which I installed on the stock rubber isolation grommets. I just used the TI
I installed a PMA alternator that I got from Mike's XS. Since I don't like (and don't much trust) markings that aren't NUMBERS and marks I didn't meas
I wasn't sure what horn I was going to wind up using and, therefore, how much current it would draw, so I installed a horn relay, which is always good
Wring the area behind the little headlight. A lot of stuff goes through here, especially if you have to have turn signals on the bike (and in NV, we d
D

A shot of the Vapor and the modified stock Yammie instrument mount I used which I installed on the stock rubber isolation grommets. I just used the TI

There are no comments to display.

Media information

Album
Winter XS650 Street Tracker Project process
Added by
dondlhmn
Date added
View count
425
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top