Put an impact on that nut and it wouldn't budge.

Put an impact on that nut and it wouldn't budge.

  • 0
  • 0
There was a screw holding this in, but I'm not sure how to get this piece out now that I removed the screw. Theres some metal bouncing around behind t

There was a screw holding this in, but I'm not sure how to get this piece out now that I removed the screw. Theres some metal bouncing around behind t

  • 0
  • 0
I'm guessing this is just a casting flaw?

I'm guessing this is just a casting flaw?

  • 0
  • 0
So this area looks jacked up next to where the kick shaft plugs in.

So this area looks jacked up next to where the kick shaft plugs in.

  • 0
  • 0
Jumpstreet Customs foot controls

Jumpstreet Customs foot controls

  • 0
  • 0
Sidecover 2.0. Puts alternator mounts more perpendicular to the crank pulley also brings alternator forward more.

Sidecover 2.0. Puts alternator mounts more perpendicular to the crank pulley also brings alternator forward more.

  • 0
  • 0
Got my rear tire in today! Coker Goodyear Diamond tread 4.5x18

Got my rear tire in today! Coker Goodyear Diamond tread 4.5x18

  • 0
  • 0
Front wheel setup. 21" shouldered alloy rim. xs650 36 spoke hub. Ducati Monster 900 320mm rotor. 2 piston Brembo caliper from KTM dirtbike.

Front wheel setup. 21" shouldered alloy rim. xs650 36 spoke hub. Ducati Monster 900 320mm rotor. 2 piston Brembo caliper from KTM dirtbike.

  • 0
  • 0
Finishing up tacking the frame.

Finishing up tacking the frame.

  • 0
  • 0
Tacking part of my frame in the jig

Tacking part of my frame in the jig

  • 0
  • 0
Chamfering the holes after I welded 1.25" DOM into them and smoothed them out.

Chamfering the holes after I welded 1.25" DOM into them and smoothed them out.

  • 0
  • 0
6 holes 2.75" apart.

6 holes 2.75" apart.

  • 0
  • 0
Milling 1.25" holes in the rectangular backbone of my custom frame.

Milling 1.25" holes in the rectangular backbone of my custom frame.

  • 0
  • 0
Using this titled xs850 neck I got from somebody on the forum.

Using this titled xs850 neck I got from somebody on the forum.

  • 0
  • 0
Inspiration for the king/queen seat I'm building.

Inspiration for the king/queen seat I'm building.

  • 0
  • 0
Scored this Lowbrow aluminum fender.

Scored this Lowbrow aluminum fender.

  • 0
  • 0
2 pot brembo from a KTM dirtbike

2 pot brembo from a KTM dirtbike

  • 0
  • 0
Exhaust

Exhaust

  • 0
  • 0
MikesXS mail call

MikesXS mail call

  • 0
  • 0
Gus and Harold at Brazosport Starter and Alternator.

Gus and Harold at Brazosport Starter and Alternator.

  • 0
  • 0
alternator spec sheet

alternator spec sheet

  • 0
  • 0
alternator mockup

alternator mockup

  • 0
  • 1
Rotor disassembled

Rotor disassembled

  • 0
  • 0
Mini Chevy 1 wire alternator

Mini Chevy 1 wire alternator

  • 0
  • 0
Ranger

Ranger's 2016 chopoff build photos

Building a bike for the 2016 xs650 Chopoff and Bike Show at Pandemonium Custom Choppers in Ohio.
Click to expand...
There are no comments to display.

Album information

Album owner
Ranger
Date created
Item count
75
View count
12,750
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

Ranger

Ranger

Media items
253
Albums
7
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Back
Top