IMG 29- Make sure spring is all the way in the pocket, with flat side of spring compressed against both sides.
IMG 26- Wrong way to install springs, must be every other smaller opening.
IMG 27- Using a pair of Channellocks, the springs really have to be compressed to fit properly. The flat sides of the springs need to fully pocket int
IMG 28- Don't install springs next to each other, like this photo. Just install 3 springs into the smaller spaces, every other opening.
IMG 29- Make sure spring is all the way in the pocket, with flat side of spring compressed against both sides.
IMG 30- Carefully pocket springs on their flat side surfaces.
IMG 31- Install 3 of the springs in the steel plate, the smaller spaces, before attaching to Primary Drive Gear.
IMG 32- Primary Drive Gear, flipped over to show spring placement.
YAM277

IMG 29- Make sure spring is all the way in the pocket, with flat side of spring compressed against both sides.

There are no comments to display.

Media information

Album
Cush Springs / Dampening Springs Guide for Replacement
Added by
YAM277
Date added
View count
497
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top