well, i blasted and painted the barrels with Calfire Stove Paint, we'll see how it goes. then ran the angle grinder with a flap-wheel over the fins t
everythings ready. 533 pistons with inner circlips and wrist pins installed - CHECK rings gapped and fitted - CHECK cam chain held up with wire w
took a dremmel to the flashings inside the ports. didn't go mad, then blasted them with fine glass media. looked awesome and smooth. New stainless ex
the .25 over pistons, no good to me.....
well, i blasted and painted the barrels with Calfire Stove Paint, we'll see how it goes. then ran the angle grinder with a flap-wheel over the fins t
just seeing how she looks
HipShot Eng. Turning the top bearing cup. my previous set up was so bad. someone had made a sleeve to hold the bearing race. they then had to turn th
almost finished the copper battery box swing arm next, got allballs kit
snailstoves

well, i blasted and painted the barrels with Calfire Stove Paint, we'll see how it goes. then ran the angle grinder with a flap-wheel over the fins t

There are no comments to display.

Media information

Album
The Build Down and Tear Up - Backward Album
Added by
snailstoves
Date added
View count
366
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top