mrtwowheel

I did this mod on a '81 CB750C. I would say it is more consistent starting.

Slide a pipe over the tang and bend it till it clears the muff, then see if it works and hits a bumper. I'd bend that tang whether it's...

I like 'em.

I soak in Barryman's Chem dip 30 minutes, rinse with hot water and maybe Dawn, good squirt or soak with carb or brake cleaner, 120 PSI...

I think you're on a good track, first determine if there is enough length and threads there. If not I would cut it off, drill and...

I don't ride naked, but I do like to ride with helmet, full face, and tight leather jackets, boots of various types depending on the...

Dreamy !!!!!!

That's an interesting doohickie.

I've been doing my 1200 GoldWing for years. The leverage from the way the arm is built almost requires no lift at all, even with me at...

Partzilla, 1979 XS650SF, Rear Wheel Diagram. I see all of the spacers/covers on this diagram.

I'm defiantly a rear end kind of guy. Female that is. Sorry no pics.

Concerning the wear on the caliper........maybe you should check your wheel bearings?

I've found that whatever I use, if it has a slight bend on the very end, less than a hook, that helps to "iron" the tab over better...

I have three '81 CB750C's. This will be an extra bank of 4 carbs that will be put together with spare parts that I have. This clogged...