Recent content by carkom

Stator is sold. The rest is still available.

All these parts came off of a perfectly working charging system. They all work as intended. They are obviously used and show their age but function just great! If you buy anything from me I'll pay for shipping so prices are as listed. Stator - $35 Rotor - $35 Regulator - $20 Rectifier - $15

My brakes did work OK accept for the locking up on hot days before the rebuild. I never tried the bike with the brakes rebuilt (new piston) and old master cylinder. I replaced the front master cylinder because the screws on the lid were all stripped out and it wasn't sealing well (reason for...

Found out the back fire was from unsynced carbs. Once I synced them everything worked great. That was about 2.5 months ago or so. I've got about 100 miles on the rebuilt engine and everything is working great! I got a Pamco ignition and new high performance coils from mikesxs about a month...

Replied to all PM's

Ignition parts are sold! Wheel/Tire is still available.

Any wiring guru's out there have any clues?

Thanks Hugh, I've had my eye on the one you offer, but my budget is closer to the $15-$20 range that can be found on ebay.

So I'm close to compiling all my parts for the PMA swap. Just need the PMA swap kit from Hugh's and a regulator/rectifier. I have a zx600 stator and I was just going to go with the regulator from the same bike. I've found, however, that this regulator has 6 wires. I'm not sure of the...

Still have tire and rotor available. Wheel/tire come with bearings assembly. I also have ignition parts available. All parts were in good working order when removed from the bike. Just upgraded to PAMCO so I'm selling the stock stuff. Coils $10/each + shipping Condenser $10 +...

Thanks! Figured one was the flasher. Seems most just toss the self canceller, which I will do as well.

Hey all, installing pamcopete's ignition system today. Trying to find a spot for the "ultimate coil" that came with the kit I got from Mikes. These two parts are tucked up under the tank above the the coils. What are they? Can I remove them or should I relocate them? Thanks!

How she sits as of right now.

Thanks Gary, it was a newb mistake...wrong set of ramps. Took the bike around the block, nice to be riding again!

She lives! Started up for me on the first kick. While adjusting the mixture screws, unplugged right spark plug, adjusted the screw. Plugged right back in and unplugged left. The bike wouldn't idle on that cylinder unless I gave it more throttle. Adjusted the throttle screw all the way in...