Recent content by D Stroy

that turned out really nice. I always like seeing mag bobbers

I use these (but didn't buy them there): http://www.leatherup.com/p/T-Bags-Tail-Bags/T-Bags-Falcon-Black-Tail-Bag-for-Harley-Davidson-and-Metric-Cruisers/195329.html?gclid=CIywwPW04L0CFYyhOgodQT8A3A Not the cheapest, but fit will on the raised 79 special seat, and there is a little secondary...

Thank you very much for the help. Mixture screws were 2.25 turns out. The last time I was in there I did check to make sure that the assembly order was correct and I had a friend double check before reassembly. Just to make sure I will pull it apart in the spring. Hypothetically, if everything...

I know I have left this thread dead for a while, figured I will update for those who helped: So far I have put in 30 pilots, 137.5 mains, replaced the needle jet o-rings, (and checked needle jets), adjusted float height per manual (which was on the lean side). Needle is still on the richest...

looks perfect

here in Etna, NH, 79' Special

I just wanted to praise Monty for shipping fast and selling parts that are clean and in great condition, just as described.

Etna, NH, I'd be down

that thing looks sick

650Central carries genuine Mikuni as well I believe

Thanks guys, I will probably end up fitting a cap somehow as I don't want to get shocked. Good to know that they would run fine even if I didn't though. -D

Has anyone here run these wires?

ok, thanks

haha ok, that's what I thought. May be difficult with the way they have the terminals attached. http://www.lowbrowcustoms.com/p344/buy/m-c-parts/electrical-amp-wiring/universal/lowbrow-customs-cloth-spark-plug-wire-sets-vintage-style-assorted-colors-available/ Think a boot will fit over that?

Is anyone running the lowbrow vintage cloth covered plug wire kit? I have it already and plan to run it, but am wondering if there is any consequence to having the open terminals like that. I would be interested to know if those of you running these wires leave them open or have added something...