Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Enjoy XS650.com?Consider making a donation to help support the site. XS650.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
Hi all
I need the following for an XS1b / XS2
The long engine bolt that goes the bottom of the engine / frame, the one I have is too short at 270mm and it looks like it should be 320/ 330mm (my be particular to the early XS)
The engine mounting bolt and nut for the top of the...
I have a lathe and I can turn it down but I first need to press the stem out.
Looking for someone with a large enough press. I will need also have to tap the thread which the retaining rings sit on or make a spacer.
When I bought my basket case XS-2 I wanted the later front end so I did a swap for the later XS650 35mm triple tree and forks. I have bolted it all together and found that the steering pin is longer on the XS650 and doesn't sit right in the frame.
I have also bought the earlier 34mm triple...
Im running Ants 200W PMA kit and a Bransden ignition on a kickstart only xs I want plenty of electric so my I can run a bright bulb in the headlight for night riding.
Whats the smallest sized battery I can get away with?
When I was looking for one of these bearings I found out how rare they are, discontinued by Yamaha and also discontinued by the manufacturer and no equivalent.
These are original OE bearings as fitted by Yamaha back in the day.
These bearings have never been fitted and are still encased in...