Recent content by slister21

Just what I NEED! count me in. Scott

I'm In!

Well the bike tried to start but then started to backfire through the right cylinder, then it dawned on me that I have the plug wires reversed. I swapped them and she fired right up and runs very smooth.

Well I am off too get oil and gas and start the engine in the bike. I spent all day finishing up loose ends. I checked for spark this morning and there was a good blue spark to the new plugs, compression was very stout. Ill report back later

If you can weld a nut on the top of what is left of the bolt then you can finish removing it. Tig weld is best but careful mig weld will work also.

Why not get a roll of gasket material put a thin film of oil on your part or the existing gasket and cut a new one. Problem solved and you saved yourself 60+ dollars

I noticed that the images are gone as well.

i used the front fender braces as well. they worked out very well

So the bike is 98% done now, I just need to install the front brake line and the fuel lines.

From the back. Many members said to ditch the flat trailer fender and I agreed. This was the original chrome front fender from the xs donor bike. Looks so much better

Went with an old school paint job. How many of you remember Eerie-Dess from Metal-Flake corp. ? Also decided to install a sight glass on the side of the tank.

Finally got time to finish the chopper and more important post pics here on the forum1 installed a new headight

No that is not a peel off paint. Silver metallic then black then candy green and red followed by clear Scott

and one more.[/URL][/IMG]