Recent content by Stone Hands

This winter, I am going to tear into the clutch and check it all out. right now the tip on using the Kickstarter really did work. I was very pleased. Thank you for the advise as well.

Well it helped. Last night I put it into 2nd gear, bike shut off, hand lever pulled in and started kicking. After 6 good kicks, it felt looser. That was it. She shifts fine. I re-adjusted the clutch adjusting screw to spec and took her out for a quick blast down the 2 lane. Gears snick through...

Thank you very much. Will try the kick it in the ass method first.

Can someone lend some advise on my problem. I have a xs2 which as set for a year or more. Engine work. Now she fires up and sounds great but when I pull in the clutch and tap into 1st, its like the clutch is not engaged at all. Bike lurches and dies. I have adjusted the clutch cable and side nut...

I was not aware of this feature. My XS2 has set for 2 years while I working on engine and carb issues. It was a project bike. Bikes starts and runs great. Now when I tried to tap into 1st from neutral, it acts like the clutch is not working. With the engine running, the clutch held in, as soon...

I have been going through the forum and am looking for specific opinions on good tried and true tires for a original 1972 XS2. It has the original Dunlop Gold Seals still on it. Good tread as the bike only has 6,000 miles on it. Side wall cracks however. I want to replace them. What works...

Have fiddled with resetting the floats on my BS38 carbs. On a XS2. With the carbs off, I know I measure from the inside surface of the carb body. As this is a slim area to get anything in, can I measure from top of the rim around the float bowl if I take that difference into consideration. So my...

Thank you.

I know this thread is years old. I have been fighting the same problem on both carbs. Plugs black and oily or wet. Fouled out to the point the bike won't start. I did this: 1. Replaced the choke plunger as you did. The replacement one from Mikes has not groove for what I think was for an O...

Great Tutorial 5 twins. I have an XS2 that is being restored. Got it about 80%done. Brakes front and back are next and this will help. Talk about original,, the bike still hast he stock Dunlop Gold Seal tires front and back. 4500 original miles. Will be replacing as well but they look good none...

Well said figure 8.

Spoken like a true follower. Another sheep in the herd.

spoken like a true follower.

I hear ya Mr Yeats. I don't care how many times it is asked and answered. Makes no difference. You are addressing the group and not asking any one person for their advise or knowledge. If Grizld1 doesn't want to waste his valuable time or has his head so far up his behind that he does not want...

bike always started and ran well. I changed out the tank and cleaned it. Had a hole in one of the carb diaphragms so I replaced both. Now it seems to want to flood out and does not appear to come close to starting.