Recent content by TPR

Thanks for your help, I'm on a learning curve with this.

I've checked the brass floats and they are fine. These are the needles. The guy I got them from thinks they are for a 1980 se and should be ok. I really have no idea. They are new and the plunger at the top work fine. Just noticed that the rubber around the seat looks flush, maybe that's the...

thanks for that, ill test the floats and send you a pic of the needles, which are rubber tipped.

Hi all, I am going over my carbs and I have a bit of a float setting issue. I have already posted on this but I am still stuck. On the earlier post someone said they are 34's and another said that they may not be off a 650. The problem is that the floats leak however I set them- which leads me...

Thanks for the replies. Turns out they are set at 27mm- used the clear pipe way to check so thanks for the advice.

Hi all, im checking the floats on my 1979 and one float is approx 24 and the other is about 27mm. the right hand carb is leaking fuel from the bottom air intake from the airbox and that's the one which is set to the 24mm setting. Points to that one being wrong but I have included some photo's...

Im after a righthand side carb body as the float arm has snapped off mine. Uk based please to avoid postage costs. Thanks

Cheers, will give it a try

thanks for that

Thanks for that, Ive had it up on the stands and the gears selected perfectly. But I cannot select anything with the engine off

Thanks, Ive had it up on the stands and selected the gears with the engine running- perfect. But I cannot select anything with the engine off

Hi Raymond, I haven't touched it. Last owner said it was running well before it was laid up if that means anything

Hi All Ive never ridden this bike before as I have been restoring it after its 25 year hibernation. It actually moved under its own power for the first time yesterday, only a few feet but hey! I found its prone to stalling when 1st is selected, but a bigger issue is that it refuse to select...

the rev counter doesn't work on my '79. I don't know if it ever has as even though it came with the bike it wasn't on it when I got it. The new cable spins from the engine and I used a electric drill from the engine end but the rev counter doesn't work. I take it this is the right type for my...

that's handy, thanks