Let's Be Careful Out There

When finishing woodwork in a new house with Watco oil, I discarded the oil rags in a sealed garbage bag, had it out in the middle of a cement floor, wife saw it and put it on a wood scrap pile in the garage. Home after a supper out, I started following my nose and found the glowing rags had melted the bag. Wised up, a week later, threw the oil rags out into an open pickup truck on a rainy wet, 40 degree night. They melted the plastic bed liner! Neighbor smoke damaged his house and burned a hole in a wood floor with Watco oil rags.
I hate to admit I melted a plastic container of mineral spirits to the liquid line out in the shed when some paper towel caught welding sparks. The solvent didn't catch fire, whew. It's not enough to just buy fire extinguishers, you need to check the gauge now and then and replace when it's gone low. Replaced my garage extinguisher this year.
Be extremely careful around horses, make sure they see, are aware of you before passing, give plenty of room, and keep moving along. Sudden loud noise or movement a frequent "scare event". Beware they may "spook" at something on the roadside and quickly move further out into the road. :unsure: On a road they travel all the time, a garbage can roadside can suddenly be a horse eating monster.:cautious:
Overtaking a horse on a bicycle a common problem. Bikes are so quiet they may be right alongside before the horse realizes you're there, resulting in a "spook", ring bell or call out well before overtaking a horse.
 
Last edited:
Fire is a scary thing, but it isn’t the only way to get hurt, or worse….

check out this very sad story from ST Owners.com (Honda ST1100 / ST1300 forum):


Yesterday at 3:51 PM
I am sad to report our very good friend Jay has passed. Last Wednesday he was riding his BMW along a street in Elmira, Ontario, and collided at slow speed (15 km/hr) with a horse and buggy travelling in the opposite direction. While we don't have a lot of detail, the horse may have turned in front of him and we believe he was struck in the torso by one of the tug poles, causing a serious injury. The horse and 18 year old female driver were uninjured and damage to the motorycle was minimal. Jay was rushed to hospital but did not survive his injuries.

Jay was very well liked and respected by all who knew him, passionate about his motorcycles and family. He was always a very positive and entertaining personna to anyone around him. We will miss him dearly. RIP Jay.

Details of the memorial service.... Saturday, August 7 beginning at noon. Details in the link below.

https://www.grahamgiddyfh.com/memorials/jean-pierre-lalonde/4682099/obituary.php
Thats to bad just a freak accident wow
 
It really is a terrible shame. I knew Jay and was a big strong guy, a skilled rider and a very nice person. Terribly sad.
 
Several years ago my dad was welding in his garage and a spark landed in an old enamel bucket that was full of cotton buffing wheels, those wheels smoldered for hours before he realized what had happened. Luckily they never caught flame because cotton is is fairly flame retardant but it could have been worse.
 
Aerosols are also a menace, just waiting for Murphy's Law to step in.
Have U ever noticed how flamable Carb Cleaner is and we all use it.
There is good reason it's handled as a Hazards Substance.

Hi jonesy,
my neighbor was grinding a weld prep in my basement when I heard the angle-grinder stop and the cussing and stomping start.
He'd suddenly found that steel wool is another thing that'll catch fire from grinding sparks. Who'da thought it?
 
Hi jonesy,
my neighbor was grinding a weld prep in my basement when I heard the angle-grinder stop and the cussing and stomping start.
He'd suddenly found that steel wool is another thing that'll catch fire from grinding sparks. Who'da thought it?
Take a 9volt battery and put steel wool on it
Makes a great fire starter
 
File these under, what could possibly go wrong? :D
7746DA91-C6F6-49E1-8B82-197B70B9642E.jpeg 04C6CE82-0494-4601-9CE1-2FE779341C57.jpeg B35BF66B-CE4B-497E-B2BE-08D14962025C.jpeg 5DF849D5-692C-4DDD-9233-1F99D8015B2C.jpeg BE67EF8F-2E0C-4C3A-B4AE-071C0F7E626B.jpeg 139E79F2-2AE0-461B-9711-D12A5681C0B3.jpeg 5DCC4A9B-BB26-4E76-8878-891A0100CF67.jpeg
 
Sponcom (spontaneous combustion) is a huge issue in underground and surface mining, we have been trained to recognize and reduce the risks associated with the possible fire it can produce. Exceptionally dangerous in the underground environment as a fire in the workings can be catastrophic (BANG) to us humans. Taking away one item from the fire triangle (heat, air, fuel) will stop it, so the oily rag issue can be averted quiet easily. It’s surprising that not many know about sponcom unless exposed to the possible event in our home workshops, we were taught in engineering at school to be really carful with rags and the risks associated in “stockpiles” of them…..so as others have pointed out, ditch the used rags in the waste bin
 
Back
Top