Search results

Hi Guy's, Does anyone know who grinds Brake Disc's in Australia, I need at least .7mm taken off. I bought a second hand rotor that has had some rust taken of with a die grinder, I didn't notice it until I put the rotor on the bike :doh: I measured it and where the dimples are; it is a...

Logically speaking, unless you change the area of the face of the piston, it should not make any difference. It just means that there will be more fluid behind the piston because it's shorter, the bore diameter of Master Cylinder and Calliper hasn't changed, this is what gives you the ratio to...

My post code is 2259. Sorry but I have not received any messages.

Strange one Skull, I already asked this question and was ignored. I wanted to know how much and if he would send to Australia, still to date no answer.:wtf:

Would you be able to send this rack to Australia, also how much do you want for it?

Hi Austblue, If you want to ride with another XS650, I live at Tuggerah. If your around this way, we could catch up and have a ride to Jerries for a coffee. See ya Noel

I adjusted the cam chain which was a little loose but the rattle goes away as soon as the oil hits the top end ... Say around 30 seconds or so. If the oil level is low it takes a bit longer. The bike runs very well except for the clutch drag thing, it is pretty hard to find issue with it. It's...

Hi Guys, I had a rattle which is like tappet clatter, I adjusted the valves and all seemed good. The adjustment didn't fix the rattle, when the engine is cold or it has been standing for a hour or so, it has this rattle like tappet lash. After starting the engine and once the oil reaches...

Is this bike still for sale? What sort of money are you looking to get, do you have a round about figure in your head you might want? Thanks Noel

Hi JD, Thanks for your reply, I have measured both bars and there seems to be a 2mm variance. The spare bars I have will fit as far as cables etc are concerned, they are just from and earlier XS650. The only part that won't go on is the throttle tube, I am unsure why there is a difference. I...

Hi all, I have a XS650D 1977 US model with a bent handle bar, I have another bar but when trying to fit it, the throttle tube will not fit. The bar is from an earlier model, I thought they were all the same size. Can I get the older tube and fit the twin cables? I am can't find any...

Actually 7/8" = 0.8750" = 22.2250mm, I measured my XS bars with digital calipers @ 22.3mm. If your trying to measure without a digital set of calipers you might see 22mm