Search results

Hi, im rebuilding my first xs650 engine. Its a 477 with 0.25 pistons. The LH cylinder was burning oil, and on inspection the LH cylinder has some ring marks. You cant feel a edge on the marks and I've done 30 seconds of honing but don't know how much I can do. Can I have advice on what to...

Hi Really need a set of VM34's carbs.

Has anybody used these carbs, I was going to replace the stock BS38 with a set from Heiden Tuning KEHIN PWK 32mm. Before I spend the pounds I want to be sure. I have searched the forum and one reply was cheap rubbish

Hi, Out riding the bike after a strip down and rebuild, engine was left. I have replaced the points, coils, resister, HT Leads and put new plugs in. Set the ignition timing and checked with the light. Took the bike out for a spin and for the first 5 miles it was spot on. Then it seemed to go...

Hi, I have an Omars flat track tank which has develped a crack in one of the seams. I'm thinking of changing it, other than a standard tank can you suggest an alternative tank for a flat tracker. thanks in advance Ken

Hi, Bit of a weird request bike my bike is in for repair, but ineed to but a cafe racer style front mudguard, can anyone tell me what the distance is between the lugs on front forks. and possibley the distance from centre of the bolt holes to the top of the tyre. thanks

Hi, I live in the UK and need a silencer for a two into one exhaust silencer, chain guard and mud guard to get my bike through an MOT.

Hi, I've got grey smoke out the exhaust when the the engine is revved and hot, and the bike is idling faster when warm, i have tried slowing it down but the idle screws are backed right off.

Hi, They may seem like a very silly question but is it normal for oil to spray out the filler hole with the cap/dipstick removed and the engine running. Not sure if I've got high crankcase pressure

Hi, can any one help with the running issue i have. Bike xs650D 19777, Unfinished street tracker, bought as an unfinished project Mods, Omars tank and seat unit, air pod filters, two into one exhaust, Standard ignition but with new bits, Iridium spark plugs, cleaned out carbs, up a size...