suggestions

So my bike fell over not too long ago and before it did it did not make this noise. Before it fell the timing chain was tensioned correctly and valve clearances were in spec. I've just recently re adjusted the cam chain tension, but haven't adjusted valve clearances yet. I don't see why they...

So my poor baby took a bad fall in the garage not too long ago :( and the result of that fall is a dented gas tank. Was doing some work on her with the center stand down and somehow I bumped the bike wrong and she came down on her right side. Oh well live and let learn. Here are some pictures...

Okay so I have a 1980 xs650 with a pretty much stock break setup with a single caliper/disc setup and a cheap $25 eBay 14mm master cylinder. I got the aftermarket m/c because the original 14mm Master cylinder was pretty much shot and beyond repair. Here's a picture of most of the current setup...

Okay so I drained the oil in my 1980 xs650 for the first time and found the usual gunk and tiny bits of metal that seems somewhat normal from what I have read on this thread. I drained the oil out and took both filters out and they look like they are in pretty bad shape. Here is some pictures...