For Sale - 1974 TX650 stock parts sell-off

osteoderm

out of the box
Messages
716
Reaction score
32
Points
28
Location
Newport, RI
Spring is here, my project is coming together, and I'm moving my shop in a couple weeks, so it's time to clear out my stock parts bin... Unless otherwise noted, these parts all came off of a 1974 TX650A with under 10k original miles.

1974 stock headlight ears, spacers, and trim. Soft crease in right-hand ear. - $25

2012-01-30_16-07-54_146.jpg


1976 stock tank in '74 Cinnamon Brown, with key, petcocks rebuilt last summer with all new internals, with all rubber mounts. Usual minor paint scuffs, single subtle dent (it IS visible in the pic, but it's that minor) - $150

2012-04-07_10-52-32_397.jpg


2012-04-07_10-52-40_616.jpg


2012-04-07_10-52-52_849.jpg


1974 stock sidecovers, never cut, no dents, usual minor paint scuffs, original paint with factory fisheyes, rubber for turnbuttons weathered but fully functional. - $50 UPDATE - SOLD

2012-04-07_10-55-41_470.jpg


2012-04-07_10-57-04_171.jpg


1974 Original stock seat. Hinge pins and cotters replaced last summer, rubber mounts in perfect shape. Seat foam perfect. Seat is super-clean, except for faded Yamaha script and one %#&$ tiny rip across the "Y" - $100 UPDATE - SOLD

2012-04-07_10-58-24_79.jpg


2012-04-07_10-58-36_34.jpg


2012-04-07_10-58-48_34.jpg


Complete intact 1974 stock wiring harness. Never cut, all stock connectors, boots, and clips. Includes stock ignition coils and wires (not pictured), flasher, condenser, etc. All working flawlessly when removed from bike last October. - $75 UPDATE - SOLD

2012-04-07_11-01-59_634.jpg


Complete battery box assembly with regulator, rectifier, and starter relay. No wires cut, all boots/connectors/clips as stock, all rubber frame mounts included (rear mounts not in picture, but I have them). All working flawlessly when removed last October. - $50

2012-04-07_11-03-01_560.jpg


2012-04-07_11-03-10_8.jpg


18" rear wheel complete. Alloy high-flange DID rim, drum brake in excellent shape. Surface blemishes only, no structural corrosion or damage. Clean spokes. Complete except for axle and outboard spacers (all internal spacers included). - $150

2012-01-30_16-15-26_250.jpg


2012-01-30_16-15-41_736.jpg


International orders welcome. Buyer pays actual shipping from 02840, USA. I have many more stock parts to post, and will include them in this thread as I get them cleaned and photographed.
 
Last edited:
ALL PRICES ARE A STARTING POINT. It's more important to me to get this stuff gone ASAP than it is to make a killing on it.

Mike's Euro Bars with stock 1974 switchgear and wiring installed - $50 UPDATE - SOLD

2012-04-10_09-01-10_637.jpg


Stock handlebar risers and rubber mounts, excellent condition - $25

2012-04-10_09-02-03_936.jpg


1974 Stock Rotor and Stator. Excellent condition, fully-functional with zero issues when removed last October. All brushes in excellent shape. Comes with woodruff key and locating pin. Wiring harness complete and uncut, but loom is cracked and stiff. Neutral switch wire connector missing. - $75

2012-04-10_09-04-49_257.jpg


1974 Stock starter motor internals. Fully-functional with zero issues when removed last October. Brushes and o-rings in excellent shape - $25

2012-04-10_09-20-53_319.jpg


1974 Stock centerstand with spring and stock shoulder bolts. - $25

2012-04-10_09-22-23_493.jpg


Buyer pays actual shipping from 02840. No reasonable offer refused! I'm moving my shop, and whatever doesn't sell this week is likely to get thrown out.
 
Last edited:
Here's some more...

1974 stock headlight bucket and front signals. Clear lenses, no cracks, all rubber parts in excellent shape. - $20

2012-04-10_09-32-57_61.jpg


1974 stock early-style front disc brake rotor. Braking surface excellent. Nubs for lock-tabs filed down. Clean fresh paint on aluminium carrier. All-new 6mm grade-10 buttonheads and stover-locknuts. - $50 UPDATE - SOLD

2012-04-10_10-10-28_702.jpg


2012-04-10_10-10-49_593.jpg


1974 Stock drum-brake swingarm with NOT-INSTALLED Joe Wiseguy underbrace. - $75 UPDATE - Brace SOLD, swingarm still available. $20 obo.

2012-04-10_10-12-43_68.jpg


1974 Stock rear fender assembly. Tail-light lens clean, turn-signals have some marring. No dents on fender that I noticed, but some surface rust. All mounting rubber, plastic clips, and stock wiring/connectors in excellent shape. - $50

2012-04-10_10-33-58_294.jpg


1974 Stock rear passenger pegs with stock muffler mounts and fasteners. Excellent peg rubber condition. - $25

2012-04-10_10-58-25_558.jpg


1974 Modified stock forks. New fork boots. New tubes (less than 100 miles since replaced) from MikesXS. New progressive-wound springs from MikesXS. New seals. Lowered approx. 1-3/4" with aluminium spacers. Late-style top-out springs added. Rebuilt damper valve seals. No axle. No triple-tree pinchbolts. Upper triple clamp extensively smoothed. - $175 UPDATE - SOLD

2012-04-10_10-52-40_730.jpg
 
Last edited:
Sorry - but will that rotor work on a '75 ? Also, do you have the front fender stays ?

Thanks !
 
Sorry - but will that rotor work on a '75 ? Also, do you have the front fender stays ?

Thanks !

The brake rotor is stock "early-style" fitment, so if your 1976 has the stock forks and calipers, then it should fit no problem.

Fender stays are sold.

Thanks!
 
Early-style Master Cylinder with manifold & brake switch - $25 UPDATE - SOLD

2012-04-13_12-28-24_985.jpg


This a Part #08-6009 from MikesXS, installed 3k miles ago. All stock hard and soft lines in excellent condition.
 
Last edited:
Is this the new master that MikesXS sells? If so, I'm interested in it, too!

Got the bars today. Thanks! Check your email.
 
1974 Stock Rear Inner Fender. Rubber gasket and rubber mounts in excellent condition. Includes clean stock bolts. - $20

2012-04-15_20-05-32_146.jpg


1974 Stock Chrome Chain Guard. No rust. Two very minor soft ding in top of guard at front. Rubber swingarm mount, original fasteners, and clips in excellent condition. - $50

2012-04-15_20-04-36_450.jpg
 
Back
Top