For Sale - 1981 Xs650 parts all to go

[member3480]

I just want to give a update on parts and THANYOU to all who bought. All parts bought are Shipped and I do have some pending waiting on shipping costs. The 1981 CARBS have been taken apart and just needed a cleaning up. So now I can sell them ready to go onto your bike and let you know what main jet is in there.
I do have motor parts from other motors so if you need motor parts ASK I MAY HAVE IT!!!
HEY GUYS I ALSO DON'T WANT TO LEAVE OUT MOTORHEADS!!!!
SO THIS IS UP FOR SALE ALSO BUT YOU HAVE TO CONTACT ME BY EMAIL
DADDYGCYCLES@YAHOO.COM

OK all you New Jersey PA NY guys let it rip
I just picked this up and have not got my hands on it yet to check anything but ALL is up for GRABS
1981 XS650 NO TITLE so frame goes to junk yard BUT 9,000 on motor and going to have this bike in parts by Thursday
WHEELS MAG and its a DRUM BRAKE MAG
CARBS SOLD!!!!
FRONT END
PIPES SOLD!!!!
LIGHTS
TANK SOLD!!!!
SEAT
FENDERS SOLD!!!
ELECTRONICS
TACK &SPEEDO SOLD!!!!
HANDLEBAR CONTROLS SOLD!!!
THIS bike looks good and will be sold at good prices
ASK and when I tear down its for sale. I am going to look at carbs and see if I have spark and maybe hear it run. This bike was in a storage locker and was told that it was a running bike.
I will ship anywhere but you are paying shipping
ALL PARTS SOLD AS IS !!!!!!!!!! So NO TRYING ON PARTS GUYS
PAYPAL or MONEY ORDER
FIRST COME FIRST SERVE
Its nice enough to KEEP NAAAAAAAAAAAAAH!!!!!!!! HAHA

 

[cuzIcan]

Hey Daddy G. Hows the overall condition of the motor? And is it worth shipping to NY?

 

[jawatkins2002]

Daddy G,

PM sent with list of parts needed.

 

[member3480]

I will know more about motor CARBS and electronics this week when I start tearing it apart. Motor has 9,000 miles on it and has compression but I want to pull carbs off and put fresh oil in it before I start it so I can say how good or bad motor is. Also don't know how long it sat but from the tires it looks like it was a used bike. I will chop the frame and get the title for a project I am doing so tail of frame is up for sale too. Mag rear drum use to be hard to find so I got questions on that already.
You can also contact me at DADDYGCYCLES@YAHOO.COM I read my emails more than I am on here.

 

[member3480]

OK HERE ARE PICTURES AND PRICES
Contact me and I will let you know if I still have the part you want
Head Light $25.00 SOLD!!!!
Turn Signals $25.00 SOLD!!!
Front Fender $25.00 SOLD!!!
Rear Fender $25.00 SOLD!!!
CARBS 1981 with boots $125.00
TCI (black box) $75.00
Tail light $20.00
Front brake setup $35.00 SOLD!!!!
Handle Bar switches $20.00 each or both for $35.00 SOLD!!!
Rear DRUM MAG $75.00 SOLD!!!!
Front Mag $50.00
Seat (has rip) $25.00
Air Box $20.00
1981 Harness $35.00 SOLD!!! Both gone
Alternator with TCI pickup $100
TCI Coil $25.00
Pipes (cross over not good $50.00 SOLD!!!!
GAS TANK $50.00 SOLD!!!!
Side Covers $30.00 both (one tab broke) SOLD!!!!
Shocks $20.00
Center Stand $20.00 SOLD!!
FRONT END $100.00
PEGS $25.00 SOLD!!!
Chain Guard $15.00
CLUTCH LEVER $15.00 SOLD!!!
Tack and speedo $35.00 SOLD!!!
MOTOR MOUNTS SOLD!!!
SWINGARM ONE SOLD!!!
ll list more as I break it down........ PRICES ARE WITHOUT SHIPPING But if you buy over $100.00 FREE SHIPPING in USA

 

[member3480]

I did not clean anything so look good before you buy. Motor needs rebuild so that's NOT FOR SALE
I also have
MORE PARTS
Motor Mounts SOLD!!!
81 Swing arm ONE SOLD!!!
Front end apart (will just sell tubes&lower if you need them)
Side markers
exhaust SOLD!!!!
Side stand
center stand SOLD!!!!

 

[chayko]

Interested in Crank and Camshaft, and headlight - if you can ship to Canada or if when paid for you could ship crank and cam to Hughs and headlight to me direct - Kingston, Ontario K7M 4B3

 

[member3480]

Yep I can do that CAM CRANK HEADLIGHT
$50.00 for crank
$45.00 For Cam
$25.00 for headlight
Plus shipping

 

[longtallrider]

HI I'm interested in the turn signals and foot pegs and centre stand speedo and tack

 

[member3480]

Tack & Speedo $35.00
Turn Signals $25.00
Center Stand $20.00
Pegs front and back $25.00
So you are $105.00 plus shipping overseas

 

[member3480]

Still got a lot of PARTS off this bike for SALE!!!!
Bike was a clean bike and if you need something make a offer!!!!

 

[fredintoon]

- - - 1981 XS650 NO TITLE so frame goes to junk yard BUT 9,000 on motor and going to have this bike in parts by Thursday - - -

Hi DaddyG,
you may get more for a straight frame selling it someplace that ain't paranoid about titles than you would get at a scrapyard.
For instance, all that's needed in Saskatchewan is a bill of sale.

 

[member3480]

The problem with selling non title frames is liability. If I have to run the numbers and do all the leg work then I would have to ask $150.00 for a non titled frame. Then you have the shipping on top close to $80.00. Then again if I want to title it I have to pay $150.00 and wait a month. Now I am sitting on a frame that I got to get $350.00 or more for. So you see whats easy just junk it and there is no hassle and I go buy another. I have given frames away then have the guy come back and ask for me to sign papers so he could get it titled. I have in storage 4 more frames that I won't sell and two of them are non titled so I have plenty. Years ago it was not a hassle to get titles now 9 didget frame numbers are tough to get threw.

 

[zeroxs650]

I am interested in the handlebar switches and the front brake setup, but don't see a price. How much shipped to 17522?

 

[member3480]

Handle bar switches have a price $35.00
Front brake setup also $35.00
Shipping $13.00
If you want them before someone else PM me or contact me at DADDYGCYCLES@YAHOO.COM

 

[zeroxs650]

Sent you an email...

 

[member3480]

Thank you ZERO

 

[zeroxs650]

Items received as advertised, thanks.

 

[member3480]

THANKYOU FOR ALL WHO BOUGHT
All parts bought will be shipped MONDAY 24th
I think I am going to break up this 1981 motor with 9,000 miles on it got two more deals coming in so I may not need it.
WHAT MOTOR PARTS DO YOU NEED??????