75 rims/hub fit up?

[dblwlf]

Hello

I've got a set of 75 dished rims. Can I lace the front one to a newer hub and use a 35 mm front end? I'd like to know before ordering spokes for these.

 

[dblwlf]

I didn't know if the 75 hub had to be used for this rim set. I'd like to use my newer hub.

 

[gggGary]

You don't need to change hubs to use 35mm forks, use the "new style" or aftermarket brake rotors on your hub, done.
Front spoke hubs 73-81 all interchange.

This Yamaha 341-25111-01-00 HUB,FRONT is used on these models and components:

1972 XS2 FRONT WHEEL (XS2) uh, not so much!
1973 TX650 FRONT WHEEL TX650
1973 TX750 FRONT WHEEL
1974 TX650A FRONT WHEEL TX650A - XS650B - C
1974 TX750A FRONT WHEEL
1975 XS650B FRONT WHEEL TX650A - XS650B - C
1977 XS650D FRONT WHEEL XS650D - E - E006501- - F
1979 XS650_2F FRONT WHEEL
1980 XS650G FRONT WHEEL
1981 XS650H FRONT WHEEL
Brand new hubs are available from the dealers!

 

[dblwlf]

Well I happen to have a newer hub extra along with and unlaced 75 rim

 

[650Skull]

+1 as gggGary says on the hubs. There is a guy in Australia getting the front hub re manufactured. Not a bad price either

Rims from 74TXA-79F Standards are all the same front 19" and back 18"

All the hubs have a cover on one side that blanks off the mounting holes for an extra rotor on the dual disk set up. 74-76 had a chrome cover and 77-79 had a plastic cover.

Check out the different models here

Pics of a 75B 34mm forks and 77D 35mm forks. Same hub different rotors to correspond with the change in forks.

 

[5twins]

I sure hope you don't plan any motor work, my God, no offense but you're clueless as far as 650s go.----- AND THERE'S NO EXCUSE FOR THIS !!!!!

Everything pretty much ever known about this bike is on-line and available. Granted, you're not expected to know the intimate details about tuning for mods, but ...... stock stuff