Bake Problem

[Socal tx650]

I just recently did a caliper rebuild kit on my 73 tx650 and i know i did everything right put the seals in right seeing how theirs only one way they can go in..then pushed the piston back in and put the caliper back together put it back on, put the brake pads in there little slots, and bleed the system no air bubbles but it seems to be locked and one side looks like the pad is all the way out and the inner pad is not out and looks like its caliper hitting rotor. NOT GOOD please help me i cant figure out why its staying like this?

 

[narrow rider]

Add more flour. Oh wait, you mean a BRAKE problem... sounds like when you pushed the piston back into the caliper, you may have gotten it a little sideways causing the piston to stick in it's bore. You might need to pull the caliper back off and see if it's moving when you squeeze the brake lever. Unstick the piston and try again. Hope this helps.

Billy

 

[Halloweenie]

Add more flour.

I thought it might be a problem baking a powder coating in a kitchen oven.

 

[hard_y_rd]

Try filling your bong with water...