bearing-bush-camshaft labyrinth

[Shakey]

Look, it's late. And I've browsed a thousand threads. And I really should go to bed. But.
Before I do...
If I have a 78 (originally) rephased cam (thank you Jerry) going back in with the advance rod doing the necessary for the Pamco unit. What combination of bush/bearing /labyrinth seal do I need??
I'm getting awfully confused

 

[5twins]

If you have a '78 cam then you shouldn't have to do any of that, the parts should already be in there. Installing those bushings/bearings/ labyrinth seal thing is only for the '80 and newer cams. They didn't come with any of that installed. '80-on models with factory electronic ignitions didn't need the advance rod anymore so Yamaha left it's support parts out of the cam.

 

[jayel]

if not already in your camshaft you will need 2 each of #'s 2 & 3
http://www.powersportsplus.com/part...+TENSIONER+XS650D+-+E+-+E006501-+-/parts.html
also available from mikes

 

[Shakey]

Spot-on Jayel and 5twins - thanks.