Brake Problems

[Shipper]

OK,

New master cylinder, new calipers, new lines - only thing original is the manifold on my 75 xs. Three hours later - no bubbles left in line when bleeding and the lever is stiffer but still not close to adequate to activate calipers. No leaks in lines or connections and wondering what to look for next.

What do the experts say?

 

[Cyclehead]

I'm not the expert - but your post sounds exactly like mine from last weekend. #4

 

[cruzin]

I put a new master cyl and stainless steel lines and rebuilt the calliper. I tried for days to get that bled. they I noticed the stop screw for my lever was out too far so I adjusted the screw and all was well.