Can someone critique this cam chain rivet job

[JE4570]

I know it doesn’t look pretty, but I did measure flare out to be about .01” does this look ok. I’m a bit anxious about it and for sure don't want it to pop on me.

Let me know what you think.

I used a homemade tool that didn’t work so well which is why it looks real messy so I then went and grabbed a real tool like I should have done in the first place at the store to finish the job.

Here is another angle

 

[gggGary]

Looks permanent to me.

 

[JE4570]

Thanks for the quick reply. I’m glad I got some affirmation. All I’ve been thinking about is possibility of the cam chain coming loose on me. Those scary thoughts were eating me alive.

 

[gggGary]

AFAIK No one has ever reported a cam chain master link coming loose.

 

[650trader]

Tsubaki links have a hollow copper plated end and are much easier to rivet.
Daido links are hard with no hollow and it's hard to keep the rivet tool on center.
In both cases the pins must be mushroomed over but not too much - you don't want a tight spot
in the chain.