rwingsfan
Xs 650 Dummy
Was looking at a friends XS, it is a 78 with stock bs 38's. It has a very high idle (around 2000-2500 rpm) idle screw all te way off. I rest the air mix screw, tried 1 1/2 to 3 turns out, amde no real difference. I then pulled the filters and found that the left side when covered will suck right in and die, but the right side can be covered and hardly no suction at all, does'nt even hardly affect the way it runs. I am having a run on carb issues as my personal ride is looking for a good set also. Ideas where to start?