Carb Tuning Screw

[AKV]

Hey guys anyone know where I can find the correct size replacement for my carb tuning screw? Seems really hard to find one. The screw broke in half so the other half is still screwed in and surprisingly at the correct position. Here are some pics of my carb and the screw.

 

[jpdevol]

What is the exact model of that carb? More pics for ID please.

 

[grizld1]

The carb is not Mikuni (no Mikuni markings) and not Keihin (no even numbered Keihin venturis after 30 mm.) Maybe some kind of Chiwanese knockoff? The broken off part of the screw is not going to be "in the correct position." The tip is going to be stuck in the full closed position, that's the only way those things break.

 

[AKV]

Here’s a few more pics gents!

What is the exact model of that carb? More pics for ID please.

not 100 percent sure but it says h32L 14a4 here are some other pics

 

[WideAWAKE]

Look like Mikes xs copes.

Try contacting them.

Good luck.

They will probably make you buy new carbs.

 

[grizld1]

Yep, that's what they look like. Those make pretty good paperweights, if you don't mind the ugly.

 

[bosco659]

Looks like a PWK or equivalent. If it is, there’s a very remote chance I would have spares from an old set up. I’ll check.

 

[AKV]

Looks like a PWK or equivalent. If it is, there’s a very remote chance I would have spares from an old set up. I’ll check.

I think they are actually! Ok lemme know thank you. Will pay top $

 

[bosco659]

Had a look and unfortunately don’t have any. Sorry.

 

[drgonzo]

OKO parts might work. I had an OKO on a TY250 that ran great.
http://www.usa-oko.com/