Gem State Outlaw
XS650 Member
Been lurking for a while now, so much good info and tips that I had to register cause I knew at some point I'd have a sticky spot. So this will be my start. I've tried to search this by a couple different key words and didn't pull anything. If there's a thread I'm overlooking let me know.
Bobber project with full tear down/rebuild. Pamco, rephase, Hugh's PMA, wiseco 0.5 over, port & polish, and lots of other goodies on the way. With the cases split I was cleaning the top case and lost the item my hanes manual calls the "blanking plug". Now gone and looking to replace this little bugger before sealing things back together. Any replacement or fab tips to get this done right? Thanks in advance from a new member.
No pic yet, cause I'm no computer wiz; but I'll work on it.
Bobber project with full tear down/rebuild. Pamco, rephase, Hugh's PMA, wiseco 0.5 over, port & polish, and lots of other goodies on the way. With the cases split I was cleaning the top case and lost the item my hanes manual calls the "blanking plug". Now gone and looking to replace this little bugger before sealing things back together. Any replacement or fab tips to get this done right? Thanks in advance from a new member.
No pic yet, cause I'm no computer wiz; but I'll work on it.