-
Enjoy XS650.com? Consider making a donation to help support the site.
XS650.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
FAWKK..How can i fix this ?
- Thread starter Travis14
- Start date
-
- Tags
- electrical engine tools
Dennis
XS650 Addict
I am thinking you need another new one
xsfanman
old wrencher
hi travis14, shit happens. Anyhow it's not that bad. try to separate the two or three damaged wires and re-conect them after peeling the insulating varnish that is on the wires.
You can do this with a sharp knife by scrapping. Make sure you re-conect the the two halves that were originally together.You also need to insulate the strands from each other' by using short pieces of shrinkable tube ,you can buy this at any auto store
You can do this with a sharp knife by scrapping. Make sure you re-conect the the two halves that were originally together.You also need to insulate the strands from each other' by using short pieces of shrinkable tube ,you can buy this at any auto store
pamcopete
Ride.Enjoy.Life is Simple
Travis,
You could just bypass that entire coil. Probably won't notice the difference. Just like Christmas tree lights. If the coil is in series with other coils, then just solder the wires coming to it together. If it is in parallel with other coils, then just leave it as is (open).
You could just bypass that entire coil. Probably won't notice the difference. Just like Christmas tree lights. If the coil is in series with other coils, then just solder the wires coming to it together. If it is in parallel with other coils, then just leave it as is (open).
Last edited:
