Mickster
XS650 Enthusiast
79 BS38 carbs. The bike has been running great since the topend rebuild, about 500 miles worth. Has been sitting for about a week.
Went out to start it and it started right up, running on one cylinder very good but barely anything on the other. OK, got out the flashlight and found there was no mix screw in the right carb. The screw, and the spring, must of launched at some point. No luck finding it.
Mikes sells the screw, with the O ring, but not the spring.
Is there a work around, or a place where I can get a couple of the correct (78-79} screws with the O rings and springs?
Thanks for your help.
Went out to start it and it started right up, running on one cylinder very good but barely anything on the other. OK, got out the flashlight and found there was no mix screw in the right carb. The screw, and the spring, must of launched at some point. No luck finding it.
Mikes sells the screw, with the O ring, but not the spring.
Is there a work around, or a place where I can get a couple of the correct (78-79} screws with the O rings and springs?
Thanks for your help.