Hi,
I have put a pair of linked carbs from a later model XS650 on my XS2 and she won't idle.
I cleaned them out pretty well and the only change was that I used the float bowls from an earlier pair of carbs as the pilot jet in one of the bowls was all chewed up.
I can get the bike to fire and run for a few seconds with the choke on but it won't idle and dies after a few seconds. It won't fire with the choke off.
I left the pilot jets from the older carbs in the bowls I used as they were the best I had.
I have tried with a variety of pilot air screw setting, a little different but not much.
I am going to drop the bowls off in the next few days and have a look.
Does anyone have any suggestions?
Many thanks.
Tim.
I have put a pair of linked carbs from a later model XS650 on my XS2 and she won't idle.
I cleaned them out pretty well and the only change was that I used the float bowls from an earlier pair of carbs as the pilot jet in one of the bowls was all chewed up.
I can get the bike to fire and run for a few seconds with the choke on but it won't idle and dies after a few seconds. It won't fire with the choke off.
I left the pilot jets from the older carbs in the bowls I used as they were the best I had.
I have tried with a variety of pilot air screw setting, a little different but not much.
I am going to drop the bowls off in the next few days and have a look.
Does anyone have any suggestions?
Many thanks.
Tim.