PWK's and petcocks from Mikes, need assistance with fuel lines.

Jafladd

XS650 Enthusiast
Messages
35
Reaction score
0
Points
6
Location
North Carolina/ Virginia
I didn't take off the original carbs, they were in pieces in a box and all the pieces were not there. I got the New PWK performance carbs from mikes, but no instructions. I have two petcocks and four fuel lines. I think I can use a two in one connector on each side and move on but I thought I would ask for some pics from you guys.
Thanks in advance.
Jacky
:confused:
 

Attachments

  • IMG_2197.JPG
    IMG_2197.JPG
    66.5 KB · Views: 117
The pair of clear lines on each carb are for the overflows, route them down under the engine. The fuel inlet should be lower. This pic -from mikesxs- shows the inlets covered with RED caps. You need to add your own (or replacement) hoses from there to the petcocks.
 

Attachments

  • Mikes Pukes.jpg
    Mikes Pukes.jpg
    36.7 KB · Views: 130
I have a set I thought was rebuild able but the guy said it had too many missing pieces to replace. I Asked mikes for suggestion which led me to these. Know anyone that needs some spare parts? I'll have a few after this.
 
Back
Top