Rear led turn signals do not flash just stay on

[JosephP87]

my front leds work just fine but when I plugged in the rears they just stay on no flash. The fronts flash but that’s it. I have an led flasher installed but I can’t figure out why the rears don’t flash. At first I thought it was a bad ground so I temp put a separate ground but still the same outcome. Any ideas? Do I need a second relay? Maybe not enough power for both front and back?

 

[XS650D]

wrong bulbs maybe, has to be the correct ones wattage ect or they will not work rite.

 

[JosephP87]

They have no bulbs. I put in a one piece rear/brake/turn signals in the rear and tower/fork turns up front.

 

[Casull]

You need an led flasher relay to work with both leds front and rear.

 

[JosephP87]

I put in a led flasher already

 

[JosephP87]

So I was thinking maybe if I wired my license plate lights that would complete the circuit and make them flash. So that’s what I did. My led license plate lights come on but again still nothing in the rear. Here’s a couple of pics of what I am talking about and a video of the fronts

 

[JosephP87]

The flasher that I bought was a El12 that was recommended. Maybe I need a different one?

 

[toglhot]

Get an adjustable flasher can, cheap as on ebay.

 

[JosephP87]

I’ll look them up now. Is there one I need to look for specifically?

 

[JosephP87]

What exactly is an adjustable flasher?

 

[toglhot]

Not a flasher, a flasher can (relay), whatever you want to call them. Here's the one I have, $2.50 from China, or spend an arm and a leg at your local auto accessory outlet for the same thing. The little round thing in the middle is the adjuster.

 

[Wingedwheel]

https://www.xs650.com/threads/led-flashers-not-flashing.55317/
Might look at this thread for some info.

 

[JosephP87]

Found one on eBay that looks exactly like the one you have toglhot 7 bucks on eBay. I’m going to order it and see if that will work.

 

[Casull]

Also check in the headlight bucket that the wiring is connected because the rear
indicators get their feed from there , joined with the front ones from the indicator switch.

 

[JosephP87]

Also check in the headlight bucket that the wiring is connected because the rear
indicators get their feed from there , joined with the front ones from the indicator switch.Didn’t even think about that. I’ll check today after work