Rear shock question

[SPUd]

Hey all,

So I am replacing my rear shocks, and I want to know the specific I.D measurements for the top and bottom mount eyes.

It looks like 10mm when I measure it, but I want to make sure before I buy some shocks. I dont have any vernier calipers to make sure my measurement is correct.

Ryan

 

[jd750ace]

Stick an open end wrench on the stud. Should have about. 020" of play if you have a decent wrench.

 

[SPUd]

Stick an open end wrench on the stud. Should have about. 020" of play if you have a decent wrench.

Cheers mate, ill give it a crack tonight.

 

[SPUd]

If someone actually knows, it would still be better, as I will buy these shocks online today

 

[Brian902]

top stud is 16 mm

bottom bolt is 10 mm

shock eye therefore must accept 16mm on the top and 10mm on the bottom.

just measured mine after removing the shock.

Enjoy!

 

[SPUd]

top stud is 16 mm

bottom bolt is 10 mm

shock eye therefore must accept 16mm on the top and 10mm on the bottom.

just measured mine after removing the shock.

Enjoy!

Thanks Brian, thats awesome. I think I will just get the Brat Kit from VI, then I can make my own mount tabs that accept whatever size bolts I need.

Cheers